SEMI-AUTOMATIC BALANCING MACHINE Semi automatic balancing machine, specifically developed to balance rotors of alternators and similar rotating parts, in a completely automatic way on two planes (dynamic). The unbalances are corrected by removing material by inclined drilling. Automatic set-up High level of flexibility High level of repeatability and precision of the unbalance measuring Diagnostic and preventive maintenance program Quick changeover High level of reliability User friendly It is composed of: one measuring unit, two drilling units ( one for each balancing plane ) and rotary table with pneumatic pliers for parts manipulation, from measuring unit to drilling units and vice versa. Operator interface by industrial PC High level of flexibility and quick

Technical data Rotors diameter Stack lamination height Machine cycle time (with two holes at maximum deepness per plane) 20 sec. plus operator handling time Measuring precision Rejected parts storage Balancing method Power supply Machine dimensions ( LxWxH) Device to balance rotors with ball bearings Industrial Vacuum cleaner for drilling chips removing SPC/ SW Printer Specifications may be subject to change without notice - © 2015 | 12 | Balance Systems S.r.l. Balance Systems S.r.l Via Roberto Ruffilli, 8/10 20060 Pessano con Bornago (Milan) - Italy Tel. (+39) 02.9504955 Fax (+39) 02.9504977...