MANUAL BALANCING MACHINE MK3 is a general purpose balancing machine recommended for processing small productions or to be used in testing laboratories for production development or to perform quality controls. High accuracy High balancing precision User friendly Quick and precise changeover through preset mechanical stops The unbalance correction is carried out manually by adding or removing material. This machine is supplied with a mechanical measuring device connected to an industrial PC. The unit is equipped with all the devices and tools necessary for rapid and secure changeover. Software is available to support the operator to correct unbalances by drilling. The standard machine includes SPC, diagnostics, safety shield. MK3 may also be installed in an automatic line so as to act as a sorting machine (GO-GO no sor

1) Measuring support 2) Safety shield 3) Revolving mechanical preset stops 4) Console 5) Spinning motor Technical data Parts diameters min/max: Stack lamination height min/max: Unbalance measuring time: Independent manual correction unit by drilling Measuring accuracy: Power supply: Power requirement: Specifications may be subject to change without notice - © 2015 - Balance Systems S.r.l. Balance Systems S.r.l Via Roberto Ruffilli, 8/10 20060 Pessano con Bornago (Milan) - Italy Tel. (+39) 02.9504955 Fax (+39) 02.9504977 [email protected] www.balancesystems.com