Features: The MK3-25 is a manual machine suitable to measure the unbalance of rotating parts on two planes (dynamic) or on one plane (static). The unbalance correction is carried out manually by adding or removing material. The main use of this machine is to balance rotors/armatures of electric motors in general, as well as car alternators or fans, turbines, brushless rotors, shafts, spindles, etc. This machine can be interfaced to manual milling/drilling units to rectify the unbalance by removing material. Operator interface by industrial PC. High level of flexibility and quick changeover. Advantages • Compact • High level of flexibility • High measuring precision • High balancing precision • Quick changeover • User friendly

OPEN SAFETY GUARD 570 mm (22.44 in) OPEN SAFETY GUARD 1410 mm (55.51 in) Technical data Master rotor Rotors Diameter: Stack lamination height: Unbalance measuring time: Digital display Drive systems: Tangential or loop belt Balancing Method Material adding or removal Measuring precision: Power supply: Machine dimensions (LxWxH): Specifications may be subject to change without notice - © 2015 | 12 | Balance Systems S.r.l. Balance Systems S.r.l Via Roberto Ruffilli, 8/10 20060 Pessano con Bornago (Milan) - Italy Tel. (+39) 02.9504955 Fax (+39) 02.9504977 [email protected] www.balancesystems.com...