DMK4-R SEMI-AUTOMATIC BALANCING MACHINE FOR ROTORS

Product catalog summary

Overview: The DMK4-R is a semi-automatic balancing machine designed for rotors used in asynchronous and brushless motors. It performs dynamic balancing on two planes and corrects unbalance through radial drilling or axial milling.

Features:

Semi-automatic operation with an industrial PC interface.
High flexibility and quick changeover capabilities.
Automatic setup and high precision in unbalance measurement.
Diagnostic and preventive maintenance programs.
User-friendly interface and high reliability.

Technical Specifications:

Maximum rotor weight: 4 kg
Rotor diameter range: 20-80 mm
Stack lamination height: 20-80 mm
Maximum production rate: 140-180 pieces per hour
Measuring precision: 0.1 gmm/kg max
Power supply: 380-480 V three-phase 50/50 Hz
Machine dimensions: 1500 x 1700 x 2200 mm

Options:

Re-checking unit
Industrial vacuum cleaner for drilling chips
SPC/SW and printer
Teleservice
Marking device

Distributor Information: Balance Systems S.r.l, Via Roberto Ruffilli, 8/10, 20060 Pessano con Bornago (Milan) - Italy. Contact: Tel. (+39) 02.9504955, Fax (+39) 02.9504977, Email: [email protected], Website: www.balancesystems.com

Certifications: UNI EN ISO 9001

Catalog excerpts

DMK4-R SEMI-AUTOMATIC BALANCING MACHINE FOR ROTORS-1

SEMIAUTOMATIC BALANCING MACHINE FOR ROTORS Features: Semi automatic balancing machine, specifically developed for balancing rotors for asynchronous motors, brushless motors and similar rotating parts, in a completely automatic way on two planes (dynamic). The unbalance is corrected by removing material as an outcome of radial drilling or axial milling. Operator interface by industrial PC. High level of flexibility and quick changeover. Automatic set-up High level of flexibility High level of repeatability and precision of the unbalance measuring Diagnostic and preventive maintenance program Quick changeover High level of reliability Us

Open the catalog to page 1

DMK4-R SEMI-AUTOMATIC BALANCING MACHINE FOR ROTORS-2

Technical data Re-checking unit Rotor diameter: Stack lamination height: Industrial Vacuum cleaner for drilling chips Measuring precision: Balancing method: Radial drilling or axial milling Marking device Power supply: Machine dimensions (LxWxH): Specifications may be subject to change without notice - © 2015 - Balance Systems S.r.l. Balance Systems S.r.l Via Roberto Ruffilli, 8/10 20060 Pessano con Bornago (Milan) - Italy Tel. (+39) 02.9504955 Fax (+39) 02.9504977 [email protected] www.balancesystems.com

Open the catalog to page 2