DMK4-A-I SEMI-AUTOMATIC BALANCING MACHINE FOR ROTORS

Product catalog summary

Overview: The DMK4-A-I is a semi-automatic dynamic balancing machine designed for automotive alternators, brushless motors, and similar rotating bodies. It balances on two planes and corrects unbalance through axial or inclined drilling.

Features:

Dynamic semiautomatic operation.
High flexibility and quick changeover.
Automatic work phases with manual loading and unloading.
PC-based operator interface.
Diagnostic and preventive maintenance programs.
High repeatability and precision in unbalance measurement.

Advantages:

Automatic setup.
No need for highly skilled operators.
Ease of use.
Fast changeover.

Technical Data:

Max rotor weight: 4 kg (expandable with special tooling).
Measuring and positioning time: 8-10 seconds.
Max sensitivity: 0.1 gmm/kg.
Max production rate: 140-180 pieces per hour.
Balancing methods: Axial and Angle drilling.
Power supply: 380-480 V three-phase 50/60 Hz.
Machine dimensions: 1800 x 1700 x 2000 mm.

Options:

Teleservice.
SPC Software.
Printer.
Audit unit.
Marking device.
Industrial vacuum cleaner for drilling chips.

Distributor Information: Balance Systems S.r.l, Via Roberto Ruffilli, 8/10, 20060 Pessano con Bornago (Milan) - Italy. Contact: Tel. (+39) 02.9504955, Fax (+39) 02.9504977, Email: [email protected], Website: www.balancesystems.com

Note: Specifications may change without notice. Certified under UNI EN ISO 9001.

Catalog excerpts

DMK4-A-I SEMI-AUTOMATIC BALANCING MACHINE FOR ROTORS-1

SEMI-AUTOMATIC BALANCING MACHINE Features: Dynamic semiautomatic balancing machine. Suitable for balancing automotive alternators rotors, brushless motors and similar rotating bodies on two planes (dynamic). Unbalance correction by two axial or inclined drilling. High level of flexibility and quick changeover. All the work phases are automatic. Pieces loading and unloading are manual. Automatic set-up. Highly skilled operator not required. Very easy to use. PC based operator interface. Easy and fast changeover. Diagnostic and preventive maintenance programs. High level of repeatability and precision of the unbalance

Open the catalog to page 1

DMK4-A-I SEMI-AUTOMATIC BALANCING MACHINE FOR ROTORS-2

Technical data 4 kg (can be increased by special tooling) Measuring and positioning time: 8-10 s (depending on rotor weight) Audit unit (depending on initial unbalance and operator skills) Balancing methods: (drilling) Axial, Angle Power supply: Machine dimensions (LxWxH): Marking device Industrial vacuum cleaner for removing drilling chips Specifications may be subject to change without notice - © 2015 - Balance Systems S.r.l. Balance Systems S.r.l Via Roberto Ruffilli, 8/10 20060 Pessano con Bornago (Milan) - Italy Tel. (+39) 02.9504955 Fax (+39) 02.9504977 [email protected] www.balancesystems.com...

Open the catalog to page 2