BTK1V-2F Balancing machine for motor and fan assemblies

Product catalog summary

Overview: The BTK1V-2F is a dynamic balancing machine designed for motor and fan assemblies, particularly suitable for balancing double assembled motors with fans, such as those used in car cooling radiators. It features a single working station that measures the unbalance of two blowers simultaneously. The machine can also balance single assembled motors with fans and offers optional electric testing of the motor.

Features:

Compact and user-friendly design.
High repeatability and precision in balancing.
No skilled operator required for operation.
Menu-driven balancing and testing cycle for ease of use.
Equipped to balance DC motors and fans, with provisions for motors with electronic control or brushless motors.

Technical Specifications:

Workable parts weight: 5 kg (11.02 lb).
Maximum fan diameter: 500 mm (19.68 in).
Programmable measure rpm.
Measuring time: 13 seconds (including acceleration, unbalance measurement, deceleration, and fan braking).
Controlled by an industrial PC.
Power supply: 230V 50/60Hz.
Machine weight: 800 kg (1763.7 lb).
Air supply requirement: 6 bar.
Machine dimensions: 1715x1241x1979 mm (67.25x48.86x77.91 in).

Options:

SPC Software.
Label printer.
Electric tests.
Barcode & data matrix management.
Tele-service.
Automatic electrical connection.
Container for unbalance corrections with display.
Bar-code/data matrix reader.
Electrical tests.
Quality certificate.

Contact Information: Balance Systems S.r.l, Via Roberto Ruffilli, 8/10, 20060 Pessano con Bornago (Milan) - Italy. Tel. (+39) 02.9504955, Fax (+39) 02.9504977, Email: [email protected], Website: www.balancesystems.com

Catalog excerpts

BTK1V-2F Balancing machine for motor and fan assemblies-1

BALANCING MACHINE FOR MOTOR AND FAN ASSEMBLIES Dynamic balancing machine suitable to balance double assembled motors with fans, such as car cooling radiators and/or similar products. The BTK1V-2F has a single working station where the unbalance of the two blowers is measured at the same time. Compact machine High level of repeatability The machine, with specific equipment, can also balance single assembled motor with fan. High balancing precision No skilled operator needed User friendly As an option it is possible to carry out the electric test of the motor. The entire balancing and testing cycle is menu-driven for easy operation. The basic machine is equipped to balance assembled DC motors and fans (without electronic control on board), but it is predisposed to accept all the necessary devices to balance assembled motors with electronic control on board or brushles

Open the catalog to page 1

BTK1V-2F Balancing machine for motor and fan assemblies-2

Technical data Workable parts weight: Label printer Electric tests Measuring time: 13s (acceleration, unbalance measures, deceleration and fan braking) Barcode & data matrx management Power supply: Machine Weight Container for unbalance corrections weight with display Bar-code/data matrix reader Machine dimensions (LxWxH): Electrical tests Tele-service Automatic electrical connection Quality certificate Specifications may be subject to change without notice - © 2015 - Balance Systems S.r.l. Balance Systems S.r.l Via Roberto Ruffilli, 8/10 20060 Pessano con Bornago (Milan) - Italy Tel. (+39) 02.9504955...

Open the catalog to page 2