Catalogs >
Balance Systems S.r.l >
B-Safe X System

B-Safe X System
6Pages

Catalog excerpts

Much more than you see Configurable system for continuous monitoring and protection of spindles and machine tools

Your safety solution B-Safe System was invented to expand spindles and machine tools diagnostics according to vibration and temperature analysis. The miniaturised system can be installed directly on your spindle guaranteeing a real-time monitoring, as well as reducing the machine downtimes by predicting malfunctions. Crash protection Immediate machine stop Continuous monitoring Data recording even if the machine is turned off Embedded data logger Information sharing Innovative solution The hybrid technology MEMS 3D and piezoelectric guarantees a complete signals analysis on a wide band. The...

Open the catalog to page 2

Always connected The always-connected B-Safe HMI is a software that allows interaction with multiple sensors at the same time and is available in different languages and layouts. It can be installed on PCs or machine tools control panels that run Microsoft Windows 7, 8.x or 10. The Fingerprint option is a B-Safe application intended for condition monitoring of machine tool and machine tool spindle based on vibration analysis; it is a valuable tool for preventive maintenance. Anomalies and wear become visible. The option records the vibration signal (RMS and FFT) in a good condition status...

Open the catalog to page 3

Integrated sensors data All sensor data (temperature and riaxial/monoaxial vibration) are available via MODBUS protocol and can be viewed through the B-Safe HMI in real-time. B-Safe HMI allows the ability to export the information at any time so that you can manage the data in complete autonomy. Related options: L2 - L3 - L4 - L9 Statistical data and Trends The B-Safe HMI allows setting coefficients and thresholds to adapt to a large variety of applications. This section includes the Spindle Check-Up function, which can monitor the real health status of your spindle. Additionally, these...

Open the catalog to page 4

Predictive maintenance at your service B-Safe Spindle Check-Up function includes multiple algorithms to monitor the efficiency of your manufacturing process, intending to maximize the productivity of your machines and the quality of your products. The statistical analysis provided by the system gives essential support for planning maintenance activities, according to the real use of your equipment. Suitable for each application A wide range of functions allows you to manage the whole machining process, based on fully customisable features as follows Collision alarm within 1 ms Waveform...

Open the catalog to page 5

Balance Systems S.r.l. (Headquarters) Balance Systems France Via Roberto Ruffilli, 8/10 20042 Pessano con Bornago, Milan ITALY Ph: +39 02 9504955 Fax: +39 02 9504977 info@balancesystems.it Zone d’Activités des Forboeufs 5 Rue des Frères Lumière 95280 Jouy-le-Moutier - FRANCE Ph: +33 1 34464972 Fax: +33 1 34413130 info@balancesystems.fr Balance Systems Corporation Balance Systems GmbH (Sales) 28003 Center Oaks Ct #107 Wixom, MI 48393 U.S.A. Ph: +1 248 3083636 Fax: +1 248 4935920 info@balancesystems.com Albert-Einstein-Straße 2 70806 Kornwestheim GERMANY Ph: +49 7154 8160471 Fax: +49 7154...

Open the catalog to page 6

B-Safe X System 6Pages

Catalog excerpts

All Balance Systems S.r.l catalogs and technical brochures

B-Safe X System
6Pages