Tools Marking Pen Tool It can contain a common ballpoint pen, a brush or any other type of marker, and can be used to make lines, curves, circle marks and even very complex shapes, letters or numbers to be used as a reference for the cut. Electric Oscillating Tool It allows the creation of high-speed cuts on a wide range of fabrics and materials. It is ideal to make straight and curved cuts, even in the case of very complex shapes and holes with very small diameter. Electric Rotary Tool This tool is equipped with an electronic motor and can handle all types of thin materials with a focus on tissues. The action of the aspirated work surface is less effective with the tissues, but thanks to the rotating knife, minimal horizontal forces are produced, guaranteeing the stability of the material during the process. Punching Tool The punching tool is used to perforate the most varied materials at high speed, creating uniform high-quality holes from 0.3 mm to 10 mm. Pneumatic Oscillating Tool The most powerful Balacchi tool that allows you to cut hard and thick materials up to 120 mm.

Pneumatic Punch tool The cylinder pushes the punch to move up and down to cut the material. The pneumatic line-shaped tool serves to cut leather, cloth, soft glass, honeycomb cardboard, KT cardboard, corrugated paper, grey cardboard, etc. Pneumatic punch is in V-shaped Kiss Cut Tool It allows the precise cutting of films without damaging the support material. Creasing tool A special tool for creating high quality creases on cardboard surfaces. It can accommodate creasing wheels for different applications. V-Cutter Tool suitable for the cutting of cardboard, for the creation of V-grooves at different...