Industrial magnetic products and tools
48Pages

Industrial magnetic products and tools >

BM Products and tools for industrial applications CONTENTS Bakker Magnetics, established in 1971, is a leading producer of magnetic pro-ducts and industrial systems based on magnetic principles. Continuous research is being undertaken in our own research department into new appli- cations and new fields for magnets and magnetic systems. By using modern, advanced computers and specialised software, complex calculations can be done very quickly which means it is possible to design magnet systems for a wide range of applications, accurately and optimally tailored to every required...

Chucks are widely used holding tools especially in themetal working industry. The most common types work on the principle of magnetism where the magnetism is, depending on the type, created by permanent magnets, electromagnets or a combination of both. The use of magnetic chucks for holding pieces of work made of ferromagnetic materials has many advantages over more conventional clamping methods. Rapid work positioning since the chuck is simply switched on and off by means of a single handle. Besides the fixed handle, all of Bakker Magnetics permanent magnetic chucks can be supplied with a...

All measurements in mm.Other sizes on request. >

These precision sine tables are especially suitable forvery accurate grinding operations of pieces of work with non-parallel faces. The angles can be set with the aid of the end guides. Because of their low height (77mm), these types of sine table are usable in a wide range of applications. Their robust construction guarantees a very long, maintenance-free life. The technical data for the chucks is identical to that for BM chucks from the series BM68.001 to BM68.210 inclusive. The sine tables are supplied with a sine chart and 2 end stops. > Art.no.ABCDEFweight (kg)netgrossBM...

With these switch units, BM electromagnetic chucks can be provided with a power supply. They include functions for demagnetising, continuous variation of the clamping force, a control light and a on/off switch. The switch units are equipped with a disconnectable machine lock. Different input and output voltages are possible on request. 1.In IP 54 casing without transformer, including remote control. Input voltage: 230 V AC/50-60 HzOutput voltage: 10 - 110 V DC Dimensions of the remote control: 120 x 70 x 80 mm > Art.no.power indimensionswattsHBDBM 65.850360300250150BM 65.851850400300150BM...

These clamping blocks are equipped with very strongNeodymium (NdFeB) magnetic elements. All the blocks in this range have a very fine pole spacing: 3 mm in steel, 2.5 mm in plastic. An exception to this are the types BM18.050 and BM18.051. These have a pole spacing in steel/plastic of 3/1.5 and 2/1.5 respectively. All versions are very suitable for holding thin pieces of work. The locks have either 2 or 3 magnetic faces. The non- magnetic face can be clamped onto every type of chuck if required. Chucks Blocks > Art.no.LWHmagnetic facesBM 18.00010080201 x 100 x 80BM 18.00112080201 x 120 x...

This demagnetising system is used to remove residualmagnetism from materials. Equipped with a signal light and an on/off switch. Power supply is 220 V AC/50 Hz. Other voltages on request. Supplied with a power cable and an earthed plug. > Art.no.LWHpowerVABM 70.100165120115280BM 70.101175220120560 BM 70.10221015511045 BM tunnel demagnetising system For removing residual magnetism from pieces of work inseries production. Equipped with a signal light, on/off switch and a power cable with an earthed plug. Power supply is 220/380 V, 50 Hz. Other voltages on request. > Art.no.dimension...

BM laminated bars and blocks Laminated bars and blocks are aids that increase theapplication possibilities for magnetic chucks. They are not magnetic but are excellent conductors of magnetic fields. Laminated bars and blocks can be machined on all faces and so be made to fit particular pieces of work. All versions are supplied with a pole spacing of 4 mm in steel and 2 mm in brass. Laminated bars with transverse pole distribution Circular laminated plates > Art.no.LWHBM 67.0011507525BM 67.0022507525BM 67.0034007525BM 67.0045007525BM 67.00515010025BM 67.00625010025 BM 67.00740010025BM...

Electronic digital angle gauge . The accuracy is 0.1 а between 0 and 10 and1.5% of the value between 10 and 45 With this measuring instrument, every angle can bequickly, simply and extremely accurately determined from another reference point. The measuring resolution is 0.1 а . The time forthe gauge to measure the angle is 10 seconds. Thanks to the use of VLSI technology and the LCD display, the instrument is compact: 138.4 x 81.5 x 38.1 mm. The electronic digital angle gauge operates for about 100 hours on a standard 9 volt battery.Art.number : BM 64.300 BM permanent magnetic aids for wire...

To position dial gauge for measuring pieces of work,Bakker Magnetics supplies an extensive range of dial gauge stands. All versions, with the exception of BM70.047, are supplied with a robust, magnetic base that can be switched on and off. There is a wide range of various functional versions such as flexible, adjustable and hydraulic attachment arms. Dial gauge stand with fixed arm Magnet is not switchable. Particularly suitable for situ-ations where there is little room. > Art.no.: BM 70.047Dimensions magnetic base: diam. 35 mm x 30 mmStand mounting: M8 Total height: 135 mm Diameter stand:...

Art.no.: BM 70.021BM 70.043Dimensions magnetic base:l x w x h 65 x 48 x 55 mmStand mounting: M8M12Fine adjustment: yesyesTotal height: 310 mm480 mmReach: 260 mm400 mmHolding force: 800 N1000 NWeight: 1.8 kg3.2 kg > Art.no.: BM 70.004Dimensions magnetic base: l x w x h 65 x 48 x 55 mmStand mounting: M8Fine adjustment: noTotal height: 370 mmReach: 240 mm Holding force: 800 NWeight: 1.6 kg > Art.no.: BM 70.018Dimensions magnetic base: l x w x h 53 x 45 x 53 mmStand mounting: M8 Fine adjustment: no Total height: 360 mmReach: 240 mmHolding force: 450 NWeight: 1.4 kg > Art.no.: BM...