Cable Pulling Winches 25 - 30 kN The winches of this series are ideal for all kind of cable laying projects, seasonal contracts in telecommunication applications and electricity supply cable network maintenance where reliability, mobility and low space A pulling force limit-switch stops line pull as soon as the preselected pulling force is reached. During pull the current force will be indicated on a gauge. Tractions in angles up to 90° (e.g. in manholes) can be enabled by a deflection boom. It will be connected to the swivel pulley at the rear of the winch. The winch is totally closed completely during operation; only the panel has to be lifted up. The complete power pack including operation panel is frame mounted and fully enclosed by a lockable soundproofed steel sheet casing with an overall length, including tow-bar, of just 2700 mm. Specifications are subject without notice. Output details are depending on use conditions

Cable Pulling Winches 25 - 30 kN Standard design: - Single-axle chassis with overrunning and automatic reversing brake system, straight tow-bar with ball type coupling, 12 V lighting system and TUV-approval - Lockable, soundproofed sheet metal hood - measuring clockwork with adjustable pull limiting switch - Operating hour counter - Petrol engine with hydrostatic gear system - Twin capstan system with rope storage drum - lifting hook - other types of engines, painting or rope lengths - Telescopic deflection boom - Single-axle chassis with hand brake, straight tow bar with ball coupling, no lightning...