Capstan Winches for Pipe Renewal Systems 30 – 50 kN RW 3000 - RW 4000 - RW 5000 The approved and compact Bagela Cable Pulling Winches in their new cover, made of Terpolymer (ABS). Well-proven with compressors, excavators and other construction machines, the application of this material was overdue for Pipe Renewal Winches. The longevity of the winch aggregate in combination with this housing makes the winch a worth-stable construction machine. For operation the soundproofed housing remains closed, only the cover of the control panel has to be opened. The winch is powered by a Diesel engine and is equipped with a steplessly controlled hydrostatic gear. Every Bagela Pipe Renewal Winch is ouftitted with the automatic hold-on system. The required line pull can be pre-selected by control of the hydraulic oil pump (pressure/flow control) which keeps the winching rope in permanent tension even at varying pull resistance. This system ensures full self-control of the winch and is more effective than manual control of the line speed. The line pull may be increased until the hydraulic overflow valves are activated. The winch itself is consisting of a twin capstan drive and rope storage drum with automatic rope stacking device. The whole pulling force is generated by a grooved double capstan system. The chassis is spring mounted and approved with 100km/h (depending on national road traffic regulations). The winch is to be retained by two telescopic and pretensionable rear props and a deflection boom against an end trestle. Specifications are subject without notice. Output details are depending on use conditions.

Capstan Winches for Pipe Renewal Systems 30 – 50 kN RW 3000 - RW 4000 - RW 5000 Telescopic deflection boom: All Bagela winches can be fitted out with a telescopic deflection boom. An appropriate holder at the winch assures the safe transport of the boom in which the end of the rope can remain. RW 5000 with deflection boom and loading lug on top Winch control Serial outfit: Optional outfit: Remote Control • Hydr. Pulling force Printer indicator PC 210, indicating: • Engine rpm • Preselected pulling force • Gear speed shifter • Pulling force pre-selection • Actual pulling force • Length (progress...