Bagela injection system Miniflow Accessories spare and wear parts Blow-in system Miniflow The Miniflow is used for blowing in fibre optic cables from 5 up to 8 mm into ducts from 7up to 16 mm. The Miniflow has a robust and compact design and is very simple to operate. The drive chains are propelled by two low-wear and low-noise hydraulic motors which enable for- and backward movement of the cable. max. speed: 80 m/min. required air flow: 1 m³/min required air pressure: 15 bar Control unit and Power Pack (125 bar / 15 L/min) essential! Order no. 111.301.00 Especially for thinner cables there is a danger of compression. The manometer at the afloat bedded blowing junction unit indicates sequentially the rise of the friction forces between pipe and cable what enables an immediate reaction with increasing the aerial amount or a reducing the pushing speed. A storage vessel with automatic lubricant dosage is contained in the equipment. Please use categorical Bagela lube B50, Order No. 111.340.00 Spare and wear parts Chain rail (front) The chain rail supports the drive chain and is mounted completely with chain wheel and holder. It is recommended to change the rear and the front rail at the same time. Order No. 111.315.01 Chain rail (rear) The chain rail supports the drive chain and is mounted completely with chain wheel and holder. It is recommended to change the rear and the front rail at the same time. Order No. 111.315.02 Wear rail for Chain rail Order No. 111.315.03 Drive chain The drive unit consists of two conveyor chains and is provided with special rubber profile. The drive chains pull the cable into the Miniflow. It is recommended to change the two drive chains at the same time. Order No. 111.315.00 Specifications are subject without notice. Output details are depending on use conditions

Bagela Einblasgerät Miniflow Zubehör, Ersatz- und Verschleißteile Pressure indicator The manometer indicates the current friction force (0-25 bar). Order No 111.328.00 Odometer The measuring instrument is integrated in the Miniflow. It simplifies the monitoring of the injected length. The measuring instrument has a maximum measurement of 99999.9 m Order No. 111.330.00 Nylon applicator The applicator leads the cable directly into the Miniflow Order No. 111.334.00 Insert The insert is available in different sizes and has to be reconciled to the actual size of the cable and the duct. Please specify...