Cable Pulling Winches 10 – 30 kN KW 1002 – KW 2002 – KW 3002 The winches of this series are ideal for seasonal contracts in telecommunication applications and electricity supply cable network maintenance where reliability, mobility and low space requirements are essential. Reliability In order to ensure constant readiness for use, the winches of this series are equipped with proved measuring and controlling devices normally found in the heavy-duty series of winches. The pulling force is logged by the PC 210 pulling force control and recording device. Mobility The relatively low weight of this compact type of winch, ready for use, i.e. between 1050 and 1200 kg, depending on the type, plus the overrunning brake, allow it to be towed by normal passenger car. Maximum power within minimum of space The winches of this series are driven by a two-cylinder four-stroke petrol engines via infinitely variable, hydrostatic transmissions. As in the heavy-duty series, the pull is generated by a twin capstan assembly without undue stress on the wire rope. The complete power pack including operation panel is frame mounted and fully enclosed by a lockable and sound proved steel sheet case. The overall length, including tow-bar, is just 2900 mm. Specifications are subject to change without notice. Output details are depending on use conditions.

Cable Pulling Winches 10 – 30 kN KW 1002 – KW 2002 – KW 3002 Standard design: Extras: (on request) Single-axle chassis with overrunning and other types of engines, painting or rope lengths automatic reversing brake system, straight Telescopic deflection boom tow-bar with ball type coupling, 12 V lighting system and TÜV-approval Dimensions and weights may differ if extras Lockable, soundproofed sheet metal hood are fitted. PC 210 pulling force control and recording device Electronic meter counter Operating hour counter Petrol engine with hydrostatic gear system Twin capstan system with rope storage...