Cable Pulling Winches 5 - 10 kN This drum-type winch is driven hydraulically by either petrol or electric motor. Mounted on a steel section frame, the winch forms a neatly closed and very compact unit. For rope payout, the drum is disengaged from the chain drive. The rope is guided through an automatic stacking device. The pulling speed is infinitely variable between 0-8 m/min The standard winch contains 200 m rope, but upon request may be furnished with max. 300 m. The max. pulling force (with half of the rope drum) is 10 kN. KTW 1000 with petrol engine and transport wheels KTW 1000 with electric motor and supporting jacks winch on basis frame winch on basis frame with Recommended accessory: Electronic pulling force measurement with digital display and pulling force limiting switch Mechanical meter counter Remote control ON/OFF (only for winch with electric motor) Transport wheels (1 axle, pneum. wheels, 1 castor wheel) 4 supports for winch with transport Control unit for winch with electric Electric pulling force measurement with limiting switch Trailer chassis 1 axle with supports Electric starter Technical Data: Specifications are subject without notice. Output details are depending on use conditions. E-Mail: [email protected]