Bagela blow-in system for fibre optic cable and micro tubes Summary Injection System Powerflow for blowing in fibre optic cables 8-22mm. max. speed: 80 m/min required air flow: 10 m³/min required air pressure: 12 bar Control unit and Power Pack (125 bar / 15 L/min) essential! Order No. 111.200.00 Injection System Multiflow for blowing in micro tubes and convertible for fibre optic cable 8-22 mm max. speed: 50 m/min required air flow: 10 m³/min required air pressure: 12 bar Control unit and Power Pack (125 bar / 15 L/min) essential! Order No. 111.250.00 Injection System Miniflow for blowing in fibre optic cables 4-8mm n tubes Ø: 10-16 mm max. speed: 80 m/min. required air flow: 1 m³/min required air pressure: 15 bar Control unit and Power Pack (125 bar / 15 L/min) essential! Order No. 111.301.00 Injection System Microflow for blowing in optical fibres 1-4 mm in tubes Ø: 5, 7 or 10 mm max. speed: 100 m/min. required air flow: 1 m³/min required air pressure: 15 bar required electric power supply: 230 V rating: 180 W Order No. 111.350.00 • Compressors must be equipped with an air cooler! • Alternatively Powerflow und Multiflow can also be operated by water! Specifications are subject without notice. Output details are depending on use conditions

Bagela blow-in system for fibre optic cable and micro tubes Summary Power Pack BHA 125/15 Hydraulic pressure:: 125 bar Flow rate: 15 l/min. Weight: 84 kg The Power Pack is required for Bagela Powerflow, Multiflow und Miniflow Order No. 010.120.00 Hydraulic hose 10 m for BHA 125/15 Bestell-Nr. 003.558.02 Hydraulic control unit With the control unit pressure and speed are regulated. The chains of the particular injection system are set in motion by the lever. The control unit is required for Bagela Powerflow, Multiflow und Miniflow Order No. 111.420.00 Compressor Mobilair M 17/15 Air pressure max.:...