Fibre optic cable laying Specifications are subject without notice..

Accessories for calibration of the protection pipes Cable avoidance and transmitter locating system Current laying techniques also includes direct blow-in methods, for which the cable ducts have to be gauged beforehand to check them for any internal deformations. This will ensure unhampered blow-in. The gauge, which contains a sonde, is blown through the cable duct by compressed air. If the gauge with the sonde gets stuck in transit, its position can exactly be pinpointed down to a depth of 7 m by passing a receiver along the course of the cable duct. As soon as the receiver approaches the sonde,...

Accessories for calibration of the protection pipes Optical fibre plunger flexible Inner ductWeight Order No.. Ø 40 mm 0.30 kg 009.957.00 50 mm 0.35 kg 009.958.00 Optical fibre plunger flexible for pipes with an implemented cable Inner duct-Ø Weight Order No.. 35-55 mm 0.45 mm 009.962.40 Optical fibre cable pulling grip made of galvanised steel wire, one thimble, double, reduced single bound Cable- ø Order-No. 2.5 – 5.6mm 009.646.00 5.3 – 9.2mm 009.646.01 8.1 – 12.5mm 009.646.02 10.7 – 15.8mm 009.646.03 13.5 – 19.1mm 009.646.04 16.3 – 22.4mm 009.646.05 19.1 – 25.5mm 009.646.06 Cable slip oil...

Accessories for calibration of the protection pipes End sizing installation with pressure gauge and compressed air connection Weight: 3.1 kg Order No. 111.042.00 4 Pressure gauge with logging For leak test Could be connected to the End sizing installation Order No. 111.445.00 Micro pipe cutter Order No.:111.261.50 Pipe Cutter for Pipe-ø 50mm For lengthswise and crosswise cuts Order No.: 111.444.00 Technische Änderungen vorbehalten. 01/12 Zertifiziert nach DIN EN ISO 9001 Certified according to DIN EN ISO 9001