Cable Drum Transport and Laying Trailer BTT 130.80V hydraulic extendable with power hydraulic drum drive and lifting system The connection of the expanding renewal energy e.g. offshore wind parks demands a massive net extension. Instead of overhead lines, high-voltage cables with large conductor cross-sections are laid in the ground. In order to avoid cable joint boxes the cable manufacturers produce the greatest possible lengths and supply the cable only on broad drums what means the laying with conventional trailers could not be managed. Cable Drum Transport and Laying Trailers of the series BTT 130.80 up to BTT 201.10 can be extended hydrau- lically. The air suspension enables the laterally lowering of the trailer to adapt to angular standing drums on difficult ground. The U-type design of the trailer, open at the rear, enables the mounting of a different triangle towing bar in which the hydraulic cylinders for the widening function are implemented. • Simple extending operation of the trailer and the drum drive via the own hydraulic system • Just secure in the required width with the locking bolts, ready • The drum axles in the suitable length are fixed at the trailer Specifications are subject without notice. Output details are depending on use conditions

Cable Drum Transport and Laying Trailer The total width of the retracted trailers is 2550 mm, so you need no special permit for a MOT approval. A maximum widening up to 4000 mm can be reached at the building site. The maximum loading width could be extended from The drum drive is divided and will proceed the extending The operation instruments for loading and controlling the drum drive are located at the left rear side. The operation lever for extending is at the left front. While this function the trailer must be moved. We build all hydraulic extendable trailers in fixed version which is flanged...