Tube Drum Transport Trailers BRT 25 picking -up a U-liner drum It is essential that contractors should adapt their tools and equipment to the rapid development of underground tube renewal techniques. While tube manufacturers first and foremost think of the most efficient way of manufacturing and packing. tube laying contractors are faced with the problem of how to transport and install the tubing. To be able to transport a drum of U-liner with a width of 2150 mm and a diameter of 3200 mm, a completely new loading concept had to be developed. On the basis of the BKT series of cable trailers a loading frame has been designed which lifts the tube drum from the rear of the trailer by engine/hydraulic drive over the rear axle and lowers it on the centre of the loading platform exactly between both axles. Almost the full width of the trailer is used as loading area without exceeding the permissible width according to the motor vehicles licensing regulations. Specifications are subject without notice. Output details are depending on use conditions

Tube Drum Transport Trailers Recommendable accessories: Drum drive system with brake device: This accessory prevents expanding two coils from passing over the sides of the drum. Moreover, a rubber friction roller is provided for braking and driving the In lowered position, while the U-liner is being inserted into the pit, the drive system remains operational and the rubber friction roller remains pressed Technical Data: Specifications are subject without notice. Output details are depending on use conditions. e-mail: [email protected]