Catalog excerpts
Recordall® Disc Meters Lead-Free Bronze Alloy, Sizes 5/8, 5/8 x 3/4, 3/4 & 1 inch NSF/ANSI Standards 61 and 372 Certified DESCRIPTION The Recordall Disc Series meters meet or exceed the most recent revision of AWWA Standard C700 and are available in a lead-free bronze alloy. The meters comply with the lead-free provisions of the Safe Drinking Water Act, are certified to NSF/ANSI Standards 61 and 372 (Trade Designations: M25-LL, M35-LL, M55-LL, M70-LL) and carry the NSF-61 mark on the housing. All components of the lead-free bronze alloy meter (housing, measuring element, seals, and so on) comprise the certified system. Applications: For use in measurement of potable cold water in residential, commercial and industrial services where flow is in one direction only. Operation: Water flows through the meter’s strainer and into the measuring chamber where it causes the disc to nutate. The disc, which moves freely, nutates on its own ball, guided by a thrust roller. A drive magnet transmits the motion of the disc to a follower magnet located within the permanently sealed register. The follower magnet is connected to the register gear train. The gear train reduces the disc nutations into volume totalization units displayed on the register or encoder face. Operating Performance: The Recordall Disc Series meters meet or exceed registration accuracy for the low flow rates (95%), normal operating flow rates (100 ±1.5%), and maximum continuous operation flow rates as specifically stated in AWWA Standard C700. Construction: Recordall Disc meter construction, which complies with ANSI/AWWA standard C700, consists of three basic components: meter housing, measuring chamber and permanently sealed register or encoder. The meter is available in a lead-free bronze alloy with externally threaded spuds. A corrosion-resistant engineered polymer material is used for the measuring chamber. Magnetic Drive: Direct magnetic drive, through the use of high-strength magnets, provides positive, reliable and dependable register coupling for straight-reading or AMR/AMI meter reading options. Tamper-Proof Features: Unauthorized removal of the register or encoder is inhibited by the option of a tamper detection seal wire screw, TORX® tamper-resistant seal screw or the proprietary tamper-resistant keyed seal screw. Each can be installed at the meter site or at the factory. Maintenance: Badger Meter Recordall Disc Series meters are designed and manufactured to provide long-term service with minimal maintenance. When maintenance is required, it can be performed easily either at the meter installation or at any other convenient location. To simplify maintenance, the register, measuring chamber, and strainer can be replaced without removing the meter housing from the installation. No change gears are required for accuracy calibration. Interchangeability of parts among like-sized meters and meter models also minimizes spare parts inventory investment. The built-in strainer has an effective straining area of twice the inlet size. Connections: Tailpieces/Unions for installations of meters on various pipe types and sizes, including misaligned pipes, are available as an option. Meter Spud and Connection Sizes “L“ Coupling Size “B“ Tailpiece Laying Nut and Model Designation × Bore Dia. Pipe Thread Length Spud Thread (in.) (in.) (NPT) (in.) (in.) (in.) 5/8 × 7-1/2 5/8 3/4 (5/8) 1/2 25 5/8 x 3/4 × 7-1/2 5/8, 3/4 1 (3/4) 3/4 3/4 × 7-1/2 3/4 1 (3/4) 3/4 3/4 × 9 3/4 1 (3/4) 3/4 35 3/4 x 1 55 70
Open the catalog to page 1Recordall® Disc Meters, Lead-Free Bronze Alloy, Sizes 5/8, 5/8 x 3/4, 3/4 & 1 inch Maximum Continuous Operation Pressure Loss at Maximum Continuous Operation Typical Operating Range (100% ±1.5%) Low Flow Maximum Operating Temperature Maximum Operating Pressure Measuring Element Meter Connections 80° F (26° C) 150 psi (10 bar) Nutating disc, positive displacement Available in NL bronze and engineered polymer to fit spud thread bore diameter sizes: 5/8 in. size: 5/8 in. (DN 15 mm) 3/4 in. (DN 20 mm) 1 in. (DN 25 mm) 5/8 × 3/4 in. size: 3/4 in. (DN 15 mm) MATERIALS Model 25 (5/8 in. & 5/8 ×...
Open the catalog to page 2Product Data Sheet Meter Size Approx. Shipping Weight 4-1/2 lb (2 kg) 4-1/2 lb (2 kg) 5-1/2 lb (2.5 kg) 5-3/4 lb (2.6 kg) 6 lb (2.7 kg) 8-3/4 lb (3.9 kg) 11-1/2 lb (5.2 kg) REGISTERS / ENCODERS Standard—Sweep-Hand Registration The standard register is a straight-reading, permanently sealed magnetic drive register. Dirt, moisture, tampering and lens fogging problems are eliminated. The register has a six-odometer wheel totalization display, 360° test circle with center sweep hand, and flow finder to detect leaks. Register gearing is made of self-lubricating engineered polymer, which...
Open the catalog to page 3Recordall® Disc Meters, Lead-Free Bronze Alloy, Sizes 5/8, 5/8 x 3/4, 3/4 & 1 inch PRESSURE LOSS CHARTS Rate of Flow in Gallons per Minute 1
Open the catalog to page 4Product Data Sheet PRESSURE LOSS CHARTS (CONTINUED) Rate of Flow in Gallons per Minute Model 55 1 in. 1
Open the catalog to page 5Recordall® Disc Meters, Lead-Free Bronze Alloy, Sizes 5/8, 5/8 x 3/4, 3/4 & 1 inch ACCURACY CHARTS Model 25 5/8 in. .1 Accuracy Percent Over Under Register Register Accuracy Percent Over Under Register Register Over Register Under Register Accuracy Percent
Open the catalog to page 6Product Data Sheet ACCURACY CHARTS (CONTINUED) Model 55 1 in. .2 Under Register Over Register Over Register Under Register Accuracy Percent
Open the catalog to page 7Recordall® Disc Meters, Lead-Free Bronze Alloy, Sizes 5/8, 5/8 x 3/4, 3/4 & 1 inch SMART WATER IS B ADGER ME T ER Recordall is a registered trademark of Badger Meter, Inc. Other trademarks appearing in this document are the property of their respective entities. Due to continuous research, product improvements and enhancements, Badger Meter reserves the right to change product or system specifications without notice, except to the extent an outstanding contractual obligation exists. © 2019 Badger Meter, Inc. All rights reserved. The Americas | Badger Meter | 4545 West Brown Deer Rd | PO Box...
Open the catalog to page 8All Badger Meter catalogs and technical brochures
-
HR-E® LCD Encoder
2 Pages
-
RVL Series
8 Pages
-
VN2000 Flow Meters
8 Pages
-
Field Flow Calibrator
4 Pages
-
Body Leakage Tester
2 Pages
-
Measurable Results
12 Pages
-
Blancett Overview
8 Pages
-
Oil and Gas Market
8 Pages
-
Automotive Products
12 Pages
-
Model CB-30
2 Pages
-
4000 series
2 Pages
-
Test and Measurement
20 Pages
-
Cox Exact Dual Rotor
8 Pages
-
RTR
2 Pages
-
ADE®
2 Pages
-
HR-E® LCD
2 Pages
-
HR-E
2 Pages
-
SRI990 Analog Positioner
2 Pages
-
735 series
2 Pages
-
GALAXY® Water Products
2 Pages
-
Model M2000 Detector
2 Pages
-
Model M2000 Amplifier
2 Pages
-
Oval Gear Meter
1 Pages
-
M5000
44 Pages
-
M4000
36 Pages
-
M3000
40 Pages
-
M2000
60 Pages