Recordall® Compound Series with Two RTRs Hi-Lo Harness Waterproof Connector DESCRIPTION The Hi-Lo Harness is designed to work with the Recordall Compound Series Meter with two Recordall Transmitter Registers (RTR®). This harness provides remote separate totalization information from each of the RTRs. SPECIFICATIONS Temperature Cable Length (Standard) 75 ft. OPERATION When connected to the output connector from the two RTRs, the Hi-Lo Harness provides two separate output signals. One signal is the equivalent totalization from the high side (turbo) of the meter, and the other is the equivalent totalization from the low side (disc) of the meter. The Hi-Lo Harness is attached to the two RTR output using a waterproof connector. The wires are 22 gauge stranded twisted pair conductors. The conductors are shielded, including a drain wire. The red conductor is positive polarity and the black conductor is negative polarity. There is a band attached to the wire that is to be connected to the high side of the meter. Product Data Sheet

Making Water Visible® Making Water Visible RTR and Recordall are registered trademarks of Badger Meter, Inc. Other trademarks appearing in this document are the property of their respective entities. Due to continuous research, product improvements and enhancements, Badger Meter reserves the right to change product or system specifications without notice, except to the extent an outstanding contractual obligation exists. © 2014 Badger Meter, Inc. All rights reserved. www.badgermeter.com The Americas | Badger Meter | 4545 West Brown Deer Rd | PO Box 245036 | Milwaukee, WI 53224-9536 | 800-876-3837...