HR-E® LCD Encoder
2Pages

{{requestButtons}}

Catalog excerpts

HR-E® LCD Encoder - 1

HR-E® LCD Encoder DESCRIPTION Applications: The High Resolution encoder (HR-E LCD) is a fully electronic, solid-state encoder with no moving parts. It is designed for use with all current Badger Meter Recordall® Disc, Turbo Series, Compound Series, Combo Series and Fire Service meters and assemblies. The HR-E LCD provides connectivity with Badger Meter ORION® and GALAXY® AMR/AMI endpoints and other AMR/AMI technology solutions approved by Badger Meter. NOTE: For more detailed information, refer to the document HR-E LCD Encoder User Manual, available at www.badgermeter.com. Field Programmable: The HR-E LCD encoder comes standard as factory programmed to customer specifications, with the option for field programming the unit of measure, meter type, meter model, digit resolution from the encoder, billing units, and rate-of-flow time and units. Programming is performed through the IR port via a computer. Electronic Resolution: Standard encoded output from the HR-E LCD is nine digits. Status Indicators: Status indicators are sent as part of the encoder extended message to AMR/AMI systems such as ORION Cellular, Fixed Network and Migratable endpoints that are capable of receiving an extended message. The details can also be read through an IR interface. Mounting: Icons on the HR-E LCD encoder face indicate encoder status and alarm conditions. The fully potted encoder assembly has a bayonet mount compatible with all Recordall Disc, Turbo Series, Compound Series, Combo Series and Fire Series meters and assemblies. The bayonet mount positions the encoder in any of four orientations for visual reading convenience. The HR-E LCD encoder can be removed from the meter without disrupting water service. Magnetic Drive Communication: The HR-E LCD encoder detects movement of the wet side meter magnet with magnetic sensors to provide reliable and dependable encoded communication. Tamper-resistant Features: Unauthorized removal of the HR-E LCD encoder is inhibited by a tamper-resistant Torx® seal screw. Torx seal screws are provided as standard accessories. Optional proprietary tamper-proof screws are also available. Magnetic sensors detect and report an attempted encoder removal. In addition, the HR-E LCD encoder is resistant to magnetic tampering. The encoder detects an attempted tamper—as well as encoder removal—and sends a tamper alarm in either situation. Approved endpoints capable of receiving the alarms, such as ORION Cellular, Fixed Network and Migratable endpoints, can then report the tamper condition to the meter reading software. SPECIFICATIONS Straight reading, permanently sealed, Encoder type electronic LCD absolute encoder with field-programmable option Status indicators, unit of measure, billing units, automatic toggle between 9-digit and 6-digit Encoder display consumption (segmented leak detector in this mode), rate of flow, meter model U.S. gallons, Imperial gallons, cubic feet, Unit of measure cubic meters, and liters clearly identified on register face Flow rate Seconds, minutes, and hours Numerals 7 mm (0.28 in.) high Weight 11 ounces Humidity 0…100% condensing Storage: – 40…60° C (– 40…140° F) Temperature Max. ambient for 1 hr: 70° C (158° F) Electronics & Display: –10…60° C (14…140° F) Electronic and visual icons for: meter functioning correctly, meter alarm Status (indicates temperature limits exceeded, indicators magnetic tamper or encoder removal), reverse flow, suspected leak, 30-day no usage, end of battery life Signal output Industry standard ASCII format Signal type Three-wire synchronous for AMR/AMI solutions Red = clock/power; Black = ground; Green = data Lithium thionyl chloride AA cell, fully encapsulated within encoder housing Battery Life 20 years (calculated)

Open the catalog to page 1
HR-E® LCD Encoder - 2

HR-E® LCD Encoder Construction: The housing of the HR-E LCD encoder is constructed of an engineered polymer enclosure and a polycarbonate lens. For long-term performance, the enclosure is fully encapsulated, weatherproof, and UV-resistant to withstand harsh environments and to protect the electronics in flooded or submerged pit applications. An epoxy potting (patented design - 8,482,908) comprises the encoder bottom. Due to this unique sealing, the HR-E LCD exceeds all applicable requirements of AWWA Standard C706 and C707. Wire Connections: The HR-E LCD encoder is available with an in-line...

Open the catalog to page 2

All Badger Meter catalogs and technical brochures

  1. RVL Series

    8 Pages

  2. Model CB-30

    2 Pages

  3. 4000 series

    2 Pages

  4. RTR

    2 Pages

  5. ADE®

    2 Pages

  6. HR-E® LCD

    2 Pages

  7. HR-E

    2 Pages

  8. 735 series

    2 Pages

  9. M5000

    44 Pages

  10. M4000

    36 Pages

  11. M3000

    40 Pages

  12. M2000

    60 Pages