Catalogs >
Badger Meter >
735 series

735 series
2Pages

Catalog excerpts

Data Industrial® 735 Series Plastic Tee Type Impeller Flow Sensor OVERVIEW Used in conjunction with any Badger Meter flow monitor or transmitter, Badger Meter non-magnetic Impeller flow sensors provide an accurate reading of the rate of liquid flow as well as total accumulated flow. A number of sensor models are offered, which cover applications for a wide range of pipe sizes and pressure/ temperature specifications. The flow sensors generate a frequency which is proportional to flow rate. An internal preamplifier allows the pulse signal to travel up to 2,000 feet without further amplification. The impeller bearing assembly, shaft and o-rings are replaceable in the field. The 735 Series Impeller flow sensors feature a four-bladed impeller design, using a proprietary, non-magnetic sensing technology. As the liquid flow turns the impeller, a low impedance signal is transmitted with a frequency proportional to the flow rate. Sensors of similar type are interchangeable, so there is no need for recalibration after servicing or replacement. MODEL 735PV These models feature a modified PVC tee with solvent weld socket end connections, and a removable, PPS sensor insert. Available sizes include 1/2”, 3/4”, and 1”. Threaded BSP adapters also available. SPECIFICATIONS See Ordering Matrix Wetted Materials (except tees) Materials Tee Adapter BSP Fitting Sensor Housing Retaining Nut Locating Pin Impeller Shaft Bearing O-Rings Wires Pressure, Temperature Ratings Recommended Design Flow Range Accuracy PVC Type 1, white PVC Type 1, gray PVC Type 1 PPS Acetal copolymer, black 300SST 300SST Tungsten Carbide UHMWPE EPDM 18AWG Irrigation Wire (solid copper) 150 PSIG @ 73° F 75 PSIG @ 110° F 2...20 FPS Designed for below grade applications such as irrigation, municipal, and groundwater monitoring where the flow rates are between 2...20 feet/second and temperatures are below 110°F. IR sensors are supplied with two single conductor, 18 AWG solid copper wire leads. 735PV PLASTIC TEE SENSORS MATRIX (1/2" TO 1") STYLE Tee Mounted Insert Sensor MATERIAL PVC (.5", .75", 1" Sch 40 only) SIZE 0.5" 0.75" 1" 0.5" with BSP Adapters 0.75" with BSP Adapters 1" with BSP Adapters ELECTRONICS HOUSING PPS ELECTRONICS IR-Irrigation O-RING EPDM SHAFT Tungsten Carbide IMPELLER 300 SST BEARING UHMWPE ± 3.0% of full scale over recommended design flow range Repeatability ± 1.5% of full scale over recommended design flow range Linearity ± 1.5% of full scale over recommended design flow range Transducer Quiescent current 600 uA @ 8…35V DC max. Excitation Quiescent voltage (Vhigh) Supply Voltage–(600 uA*Supply impedance) ON State (Vlow) Max. 1.2V DC@40 mA current limit (15W + 0.7V DC) Output Frequency 3.2...200 Hz Output Pulse Width 5 msec ± 25% Electrical Cable for IR U.L. Style 116666 copper solid AWG 18 wire w/ Sensor Electronics direct burial insulation. Rated to 105° C. Product Data Sheet

Open the catalog to page 1

Data Industrial is a registered trademark of Badger Meter, Inc. Other trademarks appearing in this document are the property of their respective entities. Due to continuous research, product improvements and enhancements, Badger Meter reserves the right to change product or system specifications without notice, except to the extent an outstanding contractual obligation exists. © 2013 Badger Meter, Inc. All rights reserved. www.badgermeter.com The Americas | Badger Meter | 4545 West Brown Deer Rd | PO Box 245036 | Milwaukee, WI 53224-9536 | 800-876-3837 | 414-355-0400 México | Badger Meter...

Open the catalog to page 2

735 series 2Pages

Catalog excerpts

All Badger Meter catalogs and technical brochures

735 series
2Pages