Document Overview

This technical drawing and specification sheet pertains to a customizable bin produced by Van Oirschot Roestvrijstaal B.V., a company based in Boxtel, The Netherlands. The document is proprietary and confidential, detailing dimensions, materials, finishes, and tolerances for the bin design.

Key Specifications

• Dimensions: Various measurements are provided, including a length of 1990 mm (78.35"), a tipping height at 100° of 1565 mm (61.6"), and other critical dimensions such as 1400 mm (55.12"), 375 mm (14.76"), and 3255 mm (128.15").
• Bin Width Adjustments: Options for bin width increments are +50 mm (+2"), +55 mm (+2.17"), and +535 mm (+21.06").
• Load Capacity: Maximum load capacity is specified as 1500 kg (3300 lb).
• Type: Designated as type CD.

Material and Finish

• Material: Stainless steel grades AISI304 (1.4301) and AISI316 (1.4404) A3 are used.
• Finish: Glass bead blasting is applied to the surface.

Tolerances and Drawing Details

• Linear Tolerances: ±5 mm (±0.2").
• Angular Tolerances: ±1°.
• Scale: 1:20.
• Projection Method: Not explicitly stated but implied standard engineering projection.

Additional Information

• Customization: Bin measures (length × width × height) and weight can be customized as per client demands.
• Protection Rating: IP56, indicating protection against dust ingress and powerful water jets.
• Contact Information: Van Oirschot Roestvrijstaal B.V., Kruisbroeksestraat 17, 5281 RV Boxtel, The Netherlands; Tel: +31(0)411 672652; Email: [email protected]; Website: www.backsaver.nl.

Critical Notes

• The drawing is proprietary and reproduction without written permission is prohibited.
• Dimensions should not be scaled directly from the drawing.