*mydirectindustry

Ceramic Heaters

Product catalog summary

Applications
Ceramic heaters are used in various applications including copiers, dehumidifiers, glue guns, heat sealing tools, instrumentation, resistors, soldering and desoldering equipment, and valve heaters.

Features
The Hotwatt Ceramic Heater features a ceramic body encasing a resistance element, packed with magnesium oxide, and terminated with flexible insulated lead wires. It can reach temperatures up to 1300˚F (705˚C).

Construction
The heater is constructed with a ceramic body, premium grade resistance wire element, magnesium oxide packaging, ceramic end seal, and flexible insulated lead wires.

Sizes
Round Ceramic Sizes: Various sizes are available with different wattages and diameters, ranging from 40W to 240W and diameters from .216 to .940 inches.
Rectangular Ceramic Sizes: Available in different lengths, wattages, thicknesses, and widths, with wattages ranging from 80W to 260W.

Standard Termination
SF1: Flexible leads for applications where leads can be bent close to the end of the unit. These leads are non-repairable.

Special Features
SF11A: Ring terminals (specify size).
SF11B: Straight quick connect terminals (specify male or female and size).
SF11C: Flag quick connect terminals (specify male or female and size).
SF11D: Space terminals (specify size).

Wattage
Normal wattage is based on 40 Watts per square inch of heated length when installed in a proper heat sink. Lower or higher wattages are available depending on the application.

Voltage
Standard voltages are 120 or 240 volts, with lower voltages available.

Ordering Information
To order, specify the catalog number, wattage, voltage, and lead length. Example: CB255-1.50/50W120V/SF1-3.

Catalog excerpts

Ceramic Heaters CERAMIC U.L. Recognized-No. E56973 C.S.A. Certified-No. 016386-0-000 Applications Copiers, Dehumidifiers, Glue Guns, Heat Sealing Tools, Instrumentation, Resisters, Soldering and Desoldering Equipment, Valve Heaters. Features • The Hotwatt Ceramic Heater is a ceramic body encasing a resistance element and packed within magnesium oxide. Construction 1 Ceramic body. Premium grade resistance wire element. Magnesium oxide packaging. Ceramic end seal. Flexible insulated lead wires. • The heaters are terminated with flexible insulated lead wires.

Open the catalog to page 1

Ceramic Heaters Standard Termination Round Ceramic Sizes Length Maximum Wattage SF1: Flexible leads for applications where leads can be bent close to the end of the unit. Leads are non-repairable. Special Features SF11A: Ring terminals. Specify #6, #8, or #10. SF11B: Straight quick connect terminals. Specify male or female and size: 3⁄16" or 1⁄4". Catalog Number Maximum Wattage The above listings are a sampling of sizes that are available. Other sizes and lengths as well as custom sizes are available. Consult factory for details and availability. SF11C: Flag quick connect terminals. Specify male...

Open the catalog to page 2

Ceramic Heaters

Ceramic Heaters

Catalog excerpts

All Backer Hotwatt Inc catalogs and technical brochures