UHTT HEATERS FOR EVERY APPLICATION Accessories ▼ IN STOCK ITEMS ▼ Terminal Covers: High Temperature (for use with post terminals) Ceramic Insulating Beads: High Temperature Trade Catalog Size Number I.D. Dimensions O.D. Length ACCESSORIES Ceramic Feed Throughs Trade Size Wire Size 1 16AWG Sleeving: Non-Fraying Fiberglass Natural (tan) Coloring 100 foot spools Nom. I.D. Fits Lead Wire .047" #26 Each assembly consists of a male and a female ceramic insulator with stainless steel screw with two flat washers, one lockwasher, two hex nuts, and two fiberwashers. Ceramic bushings without hardware are also available. White 100 foot spools Catalog No.SizeNom. I.D.Fits Lead Wire Catalog No. A-Length B-Dia C-Mounting Hole Dia D-Screw Size AC2C0042 .505" .545" .375" 8-32x114" Web: www.hotwatt.com Email: [email protected] 135

HEATERS FOR EVERY APPLICATION Accessories ▼ IN STOCK ITEMS ▼ Conduit: High Temperature, Stainless Cement: High temperature Steel, Flexible Type (forabrasion and flexing protection) Catalog Number_I D._O.D. Terminals: I Inn In mon mnrn Nickel & h \ • This cement insulates electricity but radiates Heat. It also resists acids, oils, and temperatures up to 3000*F. This is the same cement Hotwatt uses in electic Heating elements and can be used for electric kilns, furnaces, and resistors. THe cement Hardens into a porcelain-like body by air drying without the use of kilns or injury to the resistant...

nNTT HEATERS FOR EVERY APPLICATION Accessories ▼ IN STOCK ITEMS ▼ Wire: High Temperature Hook-up Features • The high temperture insulated wires are for use in internal wiring of domestic, commercial, and industrial heating, cooking, and process equipment. • Wires are suitable for service up to rated voltage in damp and dry applications with wire temperatures up to 250°C (482°F); with intermittent use in ambients as high as 650°F. • Wires are identical to that used on our own heating elements. • Available in 100 foot and 250 foot spools. 300 Volt - 250°C Wire U.L. and C.S.A. rated for 300V/250°C...

Accessories ▼ IN STOCK ITEMS ▼ Resistance Wire: Nickel Chromium Features • Hotwatt’s nickel-chromium wire (80ni-20cr) is proven to deliver outstanding performance over extended periods of time and is the same wire we use in our own electrical heating elements. Ribbon Wire ACCESSORIES • Uniformity of resistance. • Mechanical stability. • Fine surface finish. • Consult factory for specifications on other sizes and different alloys which are available. Typically Iron-Chromium-Aluminum alloy, Nickel-Iron Alloy and Thermocouple Alloys. Round Wire Catalog NumberThicknessWidthOhms/Ft. • Hotwatt will...

BHOTNHTT HEATERS FOR EVERY APPLICATION Accessories ▼ IN STOCK ITEMS ▼ • Hot Lube can greatly reduce heater-to-bore seizure when properly applied. • Improves thermal conductivity. Heat transfers more quickly from heater to part being heated when Hot Lube is used. • Increased heater life. Tighter fit made practical with use of Hot Lube. • Not electrically conductive. • Hot Lube solution is not considered hazardous. • Easy to use. • Withstands temperatures to 1600°F (875°C) Available from stock, call you nearest Hotwatt Distributor. Ordering Information: 4 ounce container catalog no. - ACHOTLUBE044...