DIRECT FIRED AIR/GAS STREAM HEATERS SERIES MIXBLOC MKBLOC TG Air Stream Burners for heat boost on oxygen rich gas turbine exhausts gas exit, low pressure drop, high turndown ratio. MIXBLOC TG Combustion air taken from process gas stream. Internal burner operating at 250°C. Pressurised Burners are constructed from Vee elements assembled in any shape to suit load and duct shape. • Output range kcal/h (kW) & odour destruction. heated gas stream or via a separate external forced fresh air supply. • The MIXBLOC series of burners FLAME MONrrOR[NO FIAME DEVraY*ME/T SCHEMATIC OF AIR/GAS STREAM BURNER MIXBLOC DESIGN ALTERNATIVES EXTERNAL COMBUSTION FAN INTERNAL BURNER EXTERNAL BURNER & COMBUSTION AIR FAN -BNIM Graup- MIX Typical cross section of a MIX Series Air Stream Burner sized to suit duct INTERNAL BURNER & COMBUSTION AIR FAN (For lower inlet air/gas temperatures) '120 years of Babcock - 72 years of Wanson - 45 years of Wanson UK There is no substitute for experience" Babcock Wanson UK Ltd 7 Elstree Way Borehamwood Hertfordshire WD6 IS UK Sales and Production facilities in France, Italy, Morocco, Central Europe, Portugal, Spain, Switzerland and UK AFTER SALES SERVICE As with all Babcock Wanson products, this Process Air Heater range is fully supported by our world wide After Sales Operation for service and spares, staffed by trained and qualified engineers to ensure life time care for the -ENIM Group- PROCESS AIR HEATERS - DIRECT AND INDIRECT INDIRECT gas or oil fired air heaters for medium and high temperatures. • Food processing • White ceramics • Meal, grain, fibre • Ejector diffuser Space Heating • Sugar refining • Milk drying • Print drying • Laminate curing DIRECT Gas or oil fired Process Air Heater for the spray drying of ceramic and other materials. • Printing, coating and laminating • Industrial Abrasives • Composite material curing • Ejector diffuser space heating • Fertiliser production • Cement production • Laminate curing • Active carbon regeneration etc Stream Burner with separate external burner and combustion air fan. High pressure for fluidised bed activation. BABCOCK WANSON PRODUCTS include - Steam Boilers, Steam Generators - Thermal Fluid Heaters & systems, VOC and Odour Destruction Equipment - Water Treatment Plant, Cabinet and Unit Heaters for Space Heating. BCEMA Turnkey contracts for complete plants - All Babcock Wanson products are progressively developed through top class R&D and backed by the International CNIM Energy Group.

INDIRECT FIRED PROCESS AIR HEATERS Thermal Capacity kcal/h (kW) Combustion Chamber Stainless Steel Stainless Steel INSPECTION DOOR COMBUSTION CHAMBER applications where pure air is required at the process. The heaters are supplied fully packaged with electrical control cabinet to suit application and ready to connect to site services. The main system air fan may be sited upstream or downstream of the heater. • Burners fitted to HTV & MTV heaters are of advanced design and construction and enable the equipment to be built to comply with emission levels regulated by European and International Directives....