Catalogs >
Babcock Wanson >
Operating Assistance Module (OAM)

Operating Assistance Module (OAM)
2Pages

Catalog excerpts

All the boiler plant operating parameters are monitored continuously: Burner Correction ranges, start-up conditions (P, T, power, time), power limitation, bur- ner shut-off delay, min./max. set-point values, upper and lower limits, regulation according to atmospheric conditions, re-starting, return to technical minimum,shut-down, etc ŕ monitoring; regulation; Օ recording; display;Օ communication.Due to its extensive modularity, it is the perfect tool for statutory inspection, maintenance and operation. Boiler Correction ranges, pressure measurements, temperature, water levels, self-checking of probes, conductivity, variation of steam demands, flue gas temperature, actual efficiency, CO > 2 emissions, etc O > 2 and CO probe ,regulation, dead time, proportionality factor, measurement/set-point deviation, etcŅ water treatment if integrated in the system, follow-up of reagent consumption,follow-up of condensate return rates, feed-water quality, thermal de-aerating quality. > WATERSTEAM CONDITIONING PRODUCTSVENTCONDENSATES size="-2">

Open the catalog to page 1

The OAM integrates the PID regulatingloops necessary for optimum operation of the boiler (boiler water level, boiler pres- sure, burner, etc.); The regulator front face views provide allthe valve measurements, set-points andoutputs; The high technological level enables network automation, with a task programming structure, which separates the critical tasks to increase reliability and rapidity. The OAM monitoring interface, both user-friendly and ergonomic, was developedfor the boiler plant operator. A series of menus and mimic diagrams is accessible via an interactive display which enables...

Open the catalog to page 2