PDC1 - 10nC PDC2 - 100nC Partial Discharge Impulse Calibrator The b2 electronic GmbH partial discharge pulse calibrators facilitate calibration (external) for the standard PD measuring circuit according to IEC 60270:2001. These battery-powered handheld devices are chosen according on the typical charge values of PD being measured to validate the measurement. The calibrators are also used to verify overall cable length and the position of joints. PDC1 and PDC2 calibrators are for direct coupling (e.g. to a cable) and generate repeatable charge pulses of high accuracy so as to insert a PD calibration signal into the test object. PD pulse magnitude can be adjusted between 10pC and 100nC (according to model chosen). www.b2hv.at Features • Indication of battery status • External calibration of PD measuring circuit according to IEC60270 • Pulse magnitudes: 10pC to 10nC (model PDC1) and 100pC to 100nC (model PDC2) • Quantify PD quantity " apparent charge" fc2 electronicgmbh

DHV1341 Rev01 - ENGLISH - Subject to alternations. Errors excepted. Illustrations are not binding. Scope of delivery Optional • PD pulse calibrator (PDC1 or PDC2) • Transport Case • BNC cable 1m • 2 pcs. crocodile clamps • User manual electronicgmbh Riedstrasse 1 | 6833 Klaus | Austria Telephone +43 (0) 5523 57373 [email protected] | www.b2hv.com