Economy series B&R planetary gearboxes Performance that is out of this world Integrated automation Global presence Solid partnership Planetary gearboxes System overview Nominal output torque 1) [Nm] Maximum output torque 1) [Nm] Maximum radial load for 20.000 1) 2) [h] Flexibility and modularity B&R‘s innovative and efficient planetary gearboxes are designed to meet every possible requirement – from the ultimate flexibility and modularity offered by B&R‘s standard series to the minimal backlash and maximum load characteristics of B&R‘s premium series. A low-cost yet powerful solution is also available with B&R‘s economy gearbox series. Maximum axial load for 20.000 1) [h] smooth shaft < Flexible building block principle for Backlash [arcmin] standard gearboxes Low backlash and high torsional rigidity with premium gearboxes Direct gearbox mounting Maintenance-free High precision Eco, standard, premium, i=3,...,512 Angular gearboxes Flexible design, hollow shaft Standard, premium, i=4,...,100 Gearboxes with output flange High stiffness Standard, premium, i=3,...,64 Direct gearbox mounting High performance density Eco, standard B&R Corporate Headquarters Bernecker + Rainer Industrie-Elektronik Ges.m.b.H. B&R Strasse 1 5142 Eggelsberg, Austria [email protected] www.br-automation.com Your local contact www.br-automation.com/contact MM-E01334.055 © 09/2013 by B&R. All rights reserved worldwide. Gearboxes with output shaft Shaft options 1) These values refer to a speed of the output shaft of n2 = 100 rpm on duty cycle KA = 1 and S1-mode for electrical machines and T = 30° C; depends on the motor shaft diameter. 2) Half way along the output shaft

Standard series Nominal output torque 1) [Nm] Nominal output torque 1) [Nm] Maximum output torque 1) [Nm] Maximum output torque 1) [Nm] Maximum radial load for 20,000 1) 2) [h] Maximum axial load for 20,000 1) [h] Backlash [arcmin] hollow shaft Shaft options 1) These values refer to a speed of the output shaft of n2 = 100 rpm on duty cycle KA = 1 and S1-mode for electrical machines and T = 30° C; depends on the motor shaft diameter. 2) Half way along the output shaft smooth shaft Maximum radial load for 20,000 1) 2) [h] Maximum axial load for 20,000 1) [h] smooth shaft Backlash [arcmin] Shaft...