2025 Power Supply Selection Guide Clean and reliable power

Power Solutions from B&K Precision For more than seven decades B&K Precision has provided reliable test and measurement instruments with global service and support. Power supplies are one of our most popular product categories and this guide will help you confidently select from a wide range of low-power (30 W) benchtop to high-power (20000 W) ATE-ready solutions and more. Finding the right power supply Start by viewing common selection criteria listed below. Common power supply selection criteria ■ Total output power Voltage and current ranges Ripple & noise Number of output channels Form factor...

• Max. Power High Range i Low Range Also referred to as "autoranging", multi-range power supplies provide more flexibility than traditional power supplies by extending the operating range beyond a single maximum power point. These supplies can provide any combination of higher voltage or higher current along a maximum power curve. This design helps save both bench space and cost by eliminating the need for having multiple power supplies on the bench or buying more power than necessary. "•" Standard "o" Optional "☆" LXI-compliant

Up to 20000 W with voltage and current configurations up to 1500 V, 120 A Flexible I/O interfaces such as GPIB, LAN, USB, RS232, and analog control Programmability via SCPI commands, LabVIEW drivers, or application software allow for remote initiation and operation High programming accuracy combined with precise built-in measurements Comprehensive protection features such as OVP, OCP, and OTP to safeguard your DUT Designed for easy integration into automated test equipment systems, our compact XLN, MPS, HPS, and MR series DC power supplies offer the power density, speed, and accuracy needed to...

These DC power supplies offer high speed and accuracy combined with advanced features such as DUT protection, list mode, and full programmability. Most supplies offer a SCPI compatible command set and come with LabVIEW drivers. Many of these power supplies are suitable for both benchtop and rack-mount applications. "•" Stengel "o" Optiona| "☆" LXI-compliant

Dual & triple output power supplies give users the flexibility to configure multiple channels to meet their application needs. Each output can be used independently, or connected in series, or parallel with other channels to increase voltage or current. This also allows for various output configurations such as positive and negative outputs for powering bipolar circuits and devices. Common Features & Benefits Independent, floating and electrically isolated outputs ■ Series or parallel operation to produce higher voltage or current output ■ Display and adjust voltage and current settings for multiple...

CV = Constant Voltage CC = Constant Current

■ AC, DC and AC+DC power source ■ Low total harmonic distortion meets the IEC 61000-3-2 standard ■ 0.98 power factor at AC input stage 0 to 300 V, low distortion AC source with models delivering up to 1500 VA, 12 Arms/48 Apeak ■ Displays Vrms, Irms, Ipeak, frequency, PF, apparent power, true power, and elapsed output time ■ Adjustable phase angle control ■ Built-in PLD and dimmer simulation ■ Voltage and frequency sweep mode ■ Pre-compliance testing for voltage dips and frequency simulation according to IEC61000-4-11 / 4-14 / 4-2 Comprehensive measurements Vrms, Arms, Vdc, +Apk, -Apk, inrush...

Solar, Automotive, and ATE Applications Solar Array Simulation (SAS) software The I-V curve of solar cells can be influenced by various weather conditions such as clouds or rain. The SAS control software allows users to set I-V parameters to simulate static and dynamic MPPT efficiencies under different conditions. ■ Variety of input parameters (Voc/Isc/Vmp/Imp/FF/FFv/FFi) Monitors real-time voltage, current, power, MPPT efficiency, and average MPPT efficiency Simulate I-V curve under different weather conditions during a day User-definable irradiance profile Generate an I-V curve with up to 1024...

For more than 70 years, B&K Precision has provided reliable and value-priced test and measurement instruments worldwide. B&K Precision is headquartered Yorba Linda, California, with development, sales and service subsidiaries located in Europe and Asia. Our European customers are most familiar with B&K Precision through Sefram, our subsidiary located in St. Etienne, France, from which we serve our customers in Europe, the Middle East, and Africa. Engineers in Asia know us through our B&K Precision Taiwan subsidiary. Our office in Taipei provides sales, service and support to our customers in...