High Speed Data Acquisition System with Printer 8460
9Pages

Data Sheet High Speed Data Acquisition System with Printer 8460 The 8460 high speed, configurable data acquisition system combines a thermal printer with a fast sampling rate, deep memory, and a large touch screen display. The system also includes built-in software tools for power analysis and mathematical function editor for performing calculations between ultiple channels. This m recorder is capable of sampling up to 1 MSa/s on all channels simultaneously in memory mode to capture transient events with confidence. File mode is perfect for long periods of recording with sample rates up to 1 MSa/s on up to 6 channels simultaneously, or up to 100 kSa/s on 36 channels simultaneously. The built-in printer provides a permanent record of the data. The printer operates in four modes. The fastest is direct mode, which prints to paper only, mixed mode prints to paper while saving the data to internal memory. External control mode starts and stops the printing with a logic signal, and transcription mode prints data previously stored in memory. The acquisition system can accommodate 4 types of measurement boards with 6 or 12 channels each and is able to measure voltage up to 1000 V RMS, current, temperature and strain gauge. Choose any combination of 3 boards, for applications ranging from small sensor signal logging to electrical power analysis. Features and benefits: sampling rate: up to 1 MSa/s (1 μs) on each channel n Fast to 36 channels (with multiplexed board) measurement board types; Universal, Multiplexed, Strain Gauge, High Voltage n Measure up to 1000 VAC with the high voltage Applications n Printed record of event activity with date and time stamp n Measure signals ranging from strain gauge signals to large electrical systems n Maintenance analysis of single and three phase systems measurements supporting thermocouples and Pt100/Pt200/Pt500/Pt1000 sensors n 270 and IRIG timing options bit resolution with multiplexed and strain gauge boards n 14 bit resolution with universal and high voltage boards n 500 4 measurement board types • Universal input (6 channels) • High voltage (6 channels) Strain gauge (6 channels) GB SSD internal memory (2 TB optional) logic input channels monitoring and control (standard USB WiFi dongle required) n Wide TFT display with 15.4 inch touchscreen host ports and LAN interface n Free Technical data subject to change © B&K Precision Corp. 2020 software for control and analysis

High Speed Data Acquisition System with Printer 8460 Front panel TFT display with touchscreen to facilitate signal viewing and analysis Remote control and monitoring Logical inputs & alarms Pulse counter and frequency measurements Earth terminal Internal clock synchronization with IRIG or GPS time Standard 3 board slots 3 additional boards with extension module

High Speed Data Acquisition System with Printer 8460 Operation highlights Channel setup displays parameters for up to 12 channels on a single screen Comprehensive triggering capabilities: Configure triggers on analog and logic channels. Select from multiple combinations of thresholds, channels and conditions. Oscilloscope like display mode with 100 kHz bandwidth XY mode for plotting one varying signal versus another Use measurement calculations for on screen display, or software defined formulas on individual channels Create user defined formulas on multiple channels with the included text...

High Speed Data Acquisition System with Printer 8460 The tools you need Energy / Power Analysis Analyze up to 4 power networks simultaneously in three phase configurations Delta, Delta (Aron), or Star. The real time display of Fresnel diagram, oscilloscope mode, and harmonics (up to 50th) measure and display voltage, current and frequency up to 1 kHz. Sefram Viewer and Pilot for 8460 are license free software that can be downloaded from www.bkprecision.com. The software tools provide the following features: Sefram Viewer acquisition analysis Sefram Pilot for 8460 n Remote control and setup...

High Speed Data Acquisition System with Printer 8460 Measurement Boards Configure the 8460 to fit your needs with any combination of module boards with up to 3 in the base unit. Universal Board High Voltage Board Multiplexed Board Strain Gauge Board Measurement Boards High Voltage Strain Gauge Maximum Voltage Sampling Rate Power Analysis Included accessories Also included: AC mains adapter 100 / 240 V, 25 pin male connector and backshell, soft wipe, stylus, screwdriver. One set of bare wire to banana adapters per channel Rugged case Ordering information Description Base Unit Part Number...

High Speed Data Acquisition System with Printer 8460 Specifications, Base Unit Note: All specifications apply to the unit after a temperature stabilization time of 30 minutes over an ambient temperature range of 23 °C ± 5 °C. Data Acquisition System Power Analysis Function Networks Single phase, 3 phase Fresnel diagram, oscilloscope, data Mean value, RMS, peak, crest factor, THD and DF for voltage & current, active, reactive and apparent power, power factor (ø) Fastest sampling rate* Memory Mode Calculated up to rank 50, with display and record File Mode (SSD disk streaming) Fastest...

High Speed Data Acquisition System with Printer 8460 Specifications, Measurement Boards Note: All specifications apply to the unit after a temperature stabilization time of 30 minutes over an ambient temperature range of 23 °C ± 5 °C. Universal Input Board Number of Channels High Voltage Board 6 Maximum Input Voltage Maximum Input Voltage Response Time Response Time Crest Factor Crest Factor Input Impedance Input Capacitance Input Capacitance High Input Impedance Option Channel Isolation Channel Isolation Analog Filters Analog Filters Digital Filters Digital Filters Duty Cycle Duty Cycle...

High Speed Data Acquisition System with Printer 8460 Specifications, Measurement boards (cont.) Note: All specifications apply to the unit after a temperature stabilization time of 30 minutes over an ambient temperature range of 23 °C ± 5 °C. Strain Gauge Board Multiplexed Board Number of Channels Strain Gauge Maximum Input Voltage Bridge Type Full Bridge, Half Bridge Bridge Voltage Input Capacitance Ranges (µStr) Data Acquisition Maximum Input Voltage Digital Filters Sampling Interval 200 µs (5 kSa/s) each channel Input Impedance Temperature with Thermocouple Analog Filters Digital Filters...