Data Sheet The BA6010 Series battery analyzers measure voltage and resistance of modern battery technologies with high accuracy, resolution, and speed. Additionally, these instruments provide auxiliary measurement parameters inductance, capacitance, dissipation factor, impedance, quality factor, reactance, and phase angle in degrees and radians. The BA6010 Series is suitable for characterizing battery chemistries that are responsive to a 1 kHz AC stimulus signal, including lead acid, lithium and alkaline type batteries used in consumer products, electric vehicles, power backup, security, and fire alarm systems. Model BA6011 supports voltage measurements of battery packs up to 300 V whereas the BA6010 features a 6 V measurement range ideal for battery cell testing. The handler and remote interfaces expands the analyzer's application to R&D and automated manufacturing environments. Features & Benefits ■ 4.3 inch color LCD display ■ Trace function for graphical display of voltage and resistance with on-screen cursor measurements ■ 4-wire kelvin test leads with fault monitoring of drive and sense lines ■ Compare and sort using 9 bins with statistical evaluations ■ A% mode for quickly determining the percent difference between batteries ■ Pass/Fail indicator with audible tone ■ Fast test speed up to 50 measurements per second to increase manufacturing throughput ■ Trigger modes internal, manual, bus and external ■ 100 internal and external storage locations for setup and screen save ■ Handler interface for easy integration with a component handler or integration with PLC ■ Standard RS232, USB (USBTMC and virtual COM) interfaces Wide range of measurements Two user-selected measurements can be displayed simultaneously, along with stimulus signals Vm and Im. Unlike comparable battery testers that only support voltage and resistance measurements, users can also characterize additional parameters such as battery capacitance thus providing additional insight into a battery's condition. Technical data subject to change © B&K Precision Corp. 2017

Battery Analyzers BA6010 Series Front panel Bright LCD display Navigation keys Display and setup keys Numeric Function keypad keypad Pass/Fail Indicator Power button Menu function keys USB  host port Input terminals Large 4.3 inch color LCD screen for easy viewing of configuration and measurements. 4-terminal front panel connection and quick connect test fixture for high accuracy measurements. Rear panel AC input terminal Chassis ground terminal Fuse line selector box Handler interface BNC Trigger USB interface terminal Standard RS232, USB (USBTMC and virtual COM) interfaces, handler interface...

Battery Analyzers BA6010 Series Improved measurement accuracy The 4-terminals on the front of the BA60I0 Series are used together with the Kelvin clip test fixture. This system minimizes the influence of the test lead resistance and improves measurement accuracy. Binning function Quickly sort components using up to 9 bins. The bin results are displayed on-screen with each cycle. The handler interface includes dedicated signal pins for each bin, Pass/Fail and end of measurement. The handler interface is suitable for integration with device handler systems or programmable logic controllers (PLC)...

Specifications All specifications apply to the unit after a temperature stabilization time of 15 minutes over an ambient temperature range of 20 °C ± 5 °C. Specifications are subject to change without notice.

Battery Analyzers BA6010 Series Specifications Resistance Measurement SLOW, MED