Data Sheet The 2.510B Series handheld digital storage oscilloscopes combine floating measurement and recorder capabilities with a built-in digital multimeter (DMM), all in one portable and lightweight package. The built-in 6000-count multimeter allows users to quickly transition from an oscilloscope to a DMM to measure DC/AC voltage and current, resistance, and capacitance, including diode and continuity tests. Features and benefits ■ 100 MHz (2511B/2515B) and 200 MHz (2512B/2516B) bandwidth ■ Maximum sample rate of 1 GSa/s ■ Maximum memory depth of 12 Mpts ■ Waveform update rate of 100,000 wfms/s (Normal mode), up to 400,000 wfms/s (Sequence mode) ■ 2 fully isolated and floating 1,000 V CAT II, 600 V CAT III rated inputs (isolated models 2515B and 2516B) ■ 300 V CAT II rated inputs (non-isolated models 2511B and 2512B) ■ Built-in 6000 count DMM with True RMS AC voltage and current measurements ■ Scope recorder and meter trend plots for data logging ■ 5.6" TFT-LCD (640 x 480) ■ Compact and lightweight - 3.86 lbs (1.75 kg) ■ Up to 5 1/2 hours (2511B / 2512B) or 4 hours (2515B / 2516B) respectively, of continuous battery operation These versatile scopes provide two analog channels with a maximum bandwidth of 200 MHz and a maximum sample rate of 1 GSa/s. Additionally, the 12 Mpts memory depth, sequence mode, and 400,000 waveforms per second update rate, allow users to capture transients and long-term signal behavior with excellent signal fidelity. Models 2515B and 2516B offer full isolation between both the oscilloscope channels, the multimeter channel, the power input and the USB host and device port. These handheld DSOs feature many useful recording functions such as scope recorder and trend plot, which allows data logging from the oscilloscope and multimeter inputs. The scope recorder function provides sample rates up to 25 kSa/s, 50 MB internal memory, and support to write directly to an external drive for up to 2 GB. The trend plot allows users to log oscilloscope or meter measurements at a slower rate up to 10 Hz with a maximum memory depth of 3.6 M samples. The 2510B Series handheld oscilloscopes are ideal for industrial applications, power systems, electronic design, and field test and service. ■ FFT including seven additional math functions: add, subtract, multiply, divide, differentiate, integrate, and square root ■ 38 automatic measurements ■ Serial bus decoding for IIC, SPI, UART, CAN and LIN protocols ■ USB host port for saving and recalling waveform setups, data, and screenshots on a USB flash drive ■ USB device port (Micro USB-TMC) for PC connectivity ■ Supports SCPI commands Technical data subject to change © B&K Precision Corp. 2023

Handheld Digital Storage Oscilloscopes 2510B Series The tools you need 12 Mpts Memory Depth Built-in Digital Multimeter See more details in your waveform with deep memory. Capture waveforms in high resolution while maintaining a high sample rate over a wider period of time than other comparable scopes. Speed up troubleshooting with the built-in 6000-count multimeter. Measurement functions include AC/DC voltage and current, resistance, capacitance, diode, and continuity test. Powerful Measurement Functions Scope and Meter Trend Plot Functions Scope Trend Plot Meter Trend Plot Display and measure...

Floating and Differential Measurements Many industrial applications such as power electronics require measurements of high voltages and currents that are not referenced to ground. Traditional line-powered oscilloscopes typically have signal common connected to earth ground, which is usually the chassis of the oscilloscope. This means that all measurements must be made relative to earth ground, which prevents users from making differential measurements where none of the test points are referenced to ground. As a workaround, some people choose to "float" an oscilloscope by removing the connection...

Handheld Digital Storage Oscilloscopes 2510B Series Front and Side Panel Scope input terminals Durable rubber bezel Provides grip and protection against accidental bumps. Scope and meter mode buttons Recorder function button Use the scope recorder or trend plot functions to log oscilloscope or multimeter measurements. Horizontal control CH1, CH2 vertical controls Auto setup Vertical, horizontal, and trigger controls are automatically adjusted for fast signal display. Multimeter shunts 10 A and 600 mA shunts are provided standard for current measurements. Multimeter input terminals Dedicated terminals...

Handheld Digital Storage Oscilloscopes 2510B Series Note: All specifications apply to the unit after a temperature stabilization time of 30 minutes over an ambient temperature range of 23 °C ± 5 °C. (1) Half channel operation means that only Ch 1 or Ch 2 is active.

Handheld Digital Storage Oscilloscopes 2510B Series

Handheld Digital Storage Oscilloscopes 2510B Series

Serial Decoder (2) Applies to 25I5B/25I6B only (3) For 10 A range, measurement time should not exceed 10 seconds. Interval time 15 minutes (4) Accuracy is based on ± (% of reading + offset)

Serial Decode Trigger

About B&K Precision For more than 70 years, B&K Precision has provided reliable and value-priced test and measurement instruments worldwide. Our headquarters in Yorba Linda, California houses our administrative and executive functions as well as sales and marketing, design, service, and repair. Our European customers are most familiar with B&K through our French subsidiary, Sefram. Engineers in Asia know us through our B+K Precision Taiwan operation. The independent service centers in Singapore and Brasil service customers in Singapore, Malaysia, Vietnam, Indonesia and South America, respectively....