Add to MyDirectIndustry favorites

Catalog excerpts

Power SuppliesPVS Series - High Power Programmable DC Power Supplies The PVS Series delivers programmable output power up to 5.1 kW and is well suited for bench use, ATE systems integration, R&D, design verification, production test, and high voltage testing. The low-noise characteristic of the PVS Series makes these instruments particularly ideal for motor inverter testing. When operated with the optional SAS software, these power supplies can be used for solar array testing applications. Model PVS60085MR is a multi-ranging supply allowing any combination of the rated voltage and current...

 Open the catalog to page 2

Power Supplies 9115 Series - 1200 W Multi-Range DC Power Supplies J1 % Any 9115 Series model can replace several supplies on your bench or in your rack. Unlike conventional supplies with fixed output ratings, these multi-range power supplies automatically recalculate voltage and current limits for each setting, providing full output power in any Volt/Amp combination within the rated voltage and current limits. Model 9115-AT automotive test functions The 9115-AT provides automotive power test waveforms compliant to DIN 40839 and ISO 16750-2 standards that can simulate common test conditions...

 Open the catalog to page 3

Power Supplies9200 Series - Multi-Range Programmable DC Power Supplies Model Supports NI Data Dashboard for LabVIEW Features & Benefits ■ Multi-range operation ■ High programming and readback resolution ■ List mode programming ■ Standard USB, RS232, and GPIB interfaces for remote control ■ Remote sense ■ Built-in Digital Voltmeter (DVM) ■ Store and recall up to 72 voltage/current presets ■ Output timer function ■ Overvoltage protection (OVP), overcurrent protection (OCP), and overtemperature protection (OTP) Features & Benefits ■ Multi-range operation ■ 10 mV/1 mA resolution over the full...

 Open the catalog to page 4

Power Supplies 9130B Series - Triple Output DC Power Supplies Model Features & Benefits ■ Three independent, fully programmable and electrically isolated outputs ■ Tracking mode to adjust voltage and current settings for all channels simultaneously ■ Connect any two or all three channels in series or parallel to produce higher voltages or currents ■ 36 memory locations for instrument state storage & recall ■ Standard USB (USBTMC-compliant), RS-232, & GPIB interfaces supporting SCPI commands for remote control ■ Overvoltage protection (OVP) and overtemperature protection (OTP) Features &...

 Open the catalog to page 5

DC Electronic Loads8600 Series - Programmable DC Electronic Loads Applications The 8600 Series Programmable DC Electronic Loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers, and photovoltaic arrays. Transient operation Transient operation enables the instrument to periodically switch between two load levels. A power supply's regulation and transient characteristics can be evaluated by monitoring the supply's output voltage under varying combinations of load levels, duty cycle, and slew rate. List mode...

 Open the catalog to page 6

DC Electronic Loads8600 Series - Programmable DC Electronic LoadsCR-LED mode 64. %U    1.26A S1.56U    CC> 1.2cA Vd = Forward voltage of the LED Rd = LED's operating resistance Vo = Operating voltage across the LED Io = Operating current across the LED Use the load's unique CR-LED operating mode to test LED drivers. This function allows users to configure the LED's operating resistance and forward voltage along with the voltage range (same as CR operation) to simulate the loading behavior of typical LEDs. High current test lead accessory Model TLPWR1 ■ Length: 2 m ■ Current: 60 A ■ Gauge: 8...

 Open the catalog to page 7

LCR Meters & Multimeters LCR meter guide Introduction to the benefits of LCR meters and the theory behind the measurements, plus related terms and example applications. Visit applications page on bkprecision.com The 891 is a compact, precise, and versatile LCR meter capable of measuring inductors, capacitors, and resistors at DC or from 20 Hz to 300 kHz, at both low and high impedance ranges. A large color display with all important parameters and measurements visible on one screen makes this meter easy to operate. A standard USB, GPIB and LAN interface enhances your productivity. The...

 Open the catalog to page 8

Function/Arbitrary Waveform Generators4050 and 4060 Series - Dual Channel Function/Arbitrary Waveform Generators Series Comparison Wide variety of modulation schemes Modulate your waveforms with AM, DSB-AM, FM, PM, ASK, FSK, and PWM modulation schemes. Synchronization and external triggering Advanced pulse generator Generate waveforms with ease Use the external 10 MHz clock input and output (4060 Series only) to synchronize your signals to a master time base. The 4060 Series can generate pulses with minimum rise/fall times of 6 ns and maximum rise/fall times of 6 seconds. The provided...

 Open the catalog to page 9

Arbitrary Waveform Generators 4075B Series - Dual and Single Channel Arbitrary Waveform Generators waveform generator Programmable markers Linear and logarithmic sweep AM/FM/FSK modulation Output ON/OFF button Gate and burst mode Store/recall up to 50 instrument settings The 4075B Series provides fully programmable markers that allow you to generate a positive TTL level output signal at the points specified by address in memory and length up to 4000 points. USBTMC interface and SCPI-compliant command set Sine Square Frequency Characteristics Triangle, Ramp Arbitrary Characteristics Pulse...

 Open the catalog to page 10

Oscilloscopes 2510 Series - 60 MHz & 100 MHz Handheld Digital Storage Oscilloscopes Capture intermittent errors in your system with the trend plot function to plot measurement values over time. Measurement functions include AC/DC voltage and current, resistance, capacitance, diode, and continuity test. 2190D - 100 MHz Digital Storage Oscilloscope Specifications EDU mode feature Educators teaching oscilloscope fundamentals can benefit from the 2190D's EDU mode to disable the Auto set button, Measure menu, and Cursors menu.

 Open the catalog to page 11

All B&K Precision catalogs and technical brochures

  1. DAS220-BAT

    5 Pages

  2. 8500B

    7 Pages

  3. 2680

    6 Pages

  4. 2560 Series

    7 Pages

  5. Model 627

    1 Pages

  6. Model 625

    1 Pages

  7. Model 635

    1 Pages

  8. Model 710

    1 Pages

  9. Model 636

    1 Pages

  10. Model 615

    1 Pages

  11. Model 630

    1 Pages

  12. Model 1211E

    1 Pages

  13. Model 231A

    2 Pages

  14. Model 262

    1 Pages

  15. LCR Meter

    1 Pages

  16. 9110 & 9111

    1 Pages

  17. 1651A & 1652

    1 Pages

  18. Model 1692

    1 Pages

  19. 9200 Series

    4 Pages

  20. XLN series

    5 Pages

  21. 9800 series

    5 Pages

  22. Light Meter

    1 Pages

Archived catalogs