COCO Highlights • Direct link to EIB/KNX (two-wire) • Link to wired M-Bus • Reading of current consumption values, meter readings, flow and return temperatures • Each KNX M-Bus Gateway can transfer up to 200 measured values • Up to 25 M-Bus devices can be connected to each KNX M-Bus Gateway • Cyclic requests are possible, parametrization per device is possible • Integrated M-Bus diagnosis functions • Simple parametrization via USB and b+b-Terminal • Supports primary and secondary M-Bus addresses • Rail mounted device (6TE = 105mm) with integrated 100V - 240V wide range power supply • Interfaces present: ■ EIB/KNX 2-wire connection through standard EIB/KNX bus terminal ■ USB connection through Mini USB socket ■ M-Bus connection through screw terminals - M-Bus data rate 2400 Baud (max. 25 M-Bus unit loads / 1 unit load = 1,5 mA) Introduction The KNX M-Bus Gateway serves for communication between the EIB/KNX bus system and M-Bus capable meters. The gateway takes up the role of a M-Bus Master, i.e. it controls the communication. M-Bus energy meter data can be read either in cycles at certain intervals or on request by the EIB/KNX bus system. Different data formats can be set for each measured value, so that the consumption value can be sent to the EIB/KNX Bus as an integer, a temperature value as a floating point value, etc.. The KNX M-Bus Gateway also offers several diagnosis functions for M-Bus meters, such as automated search and identification of the connected M-Bus slaves. The answering data sent by the meter is presented in detail in clear text, so that the time-consuming procurement of M-Bus telegram description is dispensed with. The diagnosis functions can be used through simple ASCII commands. Parametrization and diagnosis is performed through the integrated USB interfaces in connection with our b+b Terminal software. The gateway hardware consists of a 6TE (= 105mm) wide rail mounting housing with integrated 100V - 240V power unit and connections for M-Bus and EIB/KNX at the same time. The device is maintenance-free without fan or any other wear parts. Fields of application • Simple integration of M-Bus meters in EIB/KNX systems • Reading of current consumption values, energy values and flow and return temperatures • Diagnosis functions for M-Bus meters Contents of delivery • KNX M-Bus Gateway • USB cable for parametrization/diagnosis • b+b Terminal Software • Documentation errors and omissions excepted b+b Automations- und Steuerungstechnik GmbH Beerfelden Site I ■ DieselstraBe 18 ■ Airlenbach Site II ■ EichenstraBe 38a ■ 64760 Oberzent (Germany) phone: +49 (0) 6068 9310-0 ■ fax: +49 (0) 6068 9310-99 [email protected] ■ www.bb-automation.com