EIBAnalyzer The recording device for EIB/KNX diagnostics without a connected PC (recorded data will be stored on a standard USB memory stick) Incl. 2 GB USB-Stick EIBDoktor software included Highlights • Recording of EIB/KNX-telegrams without a PC • No bus manipulation during recording Fields of application Sometimes a customer is reporting frequentfailures in his EIB/KNX installation. But ofcourse the problem only occurs occasionally, one or two times each month. Now it would be very helpful to record all data of the EIB/KNX bus, and to analyze the data after the customer has reported a failure. You can do that with the EIBAnalyzer, without leaving a complete PC for the logging at your customer's place. Simply install the rail mountable analyzer device, plug in an USB stick, and let it run. After the problem occurred, unplug the stick, and use the included EIBDoktor software to check out what exactly had happened on the EIB/KNX. Contents of delivery • EIBAnalyzer • 2GB USB flash memory stick • EIBDoktor soft wa re • Documentation errors and omissions excepted b+b Automations- und Steuerungstechnik GmbH Beerfelden Site I ■ DieselstraBe 18 ■ Airlenbach Site II ■ EichenstraBe 38a ■ 64760 Oberzent (Germany) phone: +49 (0) 6068 9310-0 ■ fax: +49 (0) 6068 9310-99 [email protected] ■ www.bb-automation.com