AZO SOLIDS InnovationAZODOS® type P ... DV, type P ... DW For continuous dosing of powder products Maximum dosing accuracy Used as loss-in-weight scale Easy to clean by means of extraction device Double screw for bulk materials with poor flow properties • Dosing screw and agitator with bayonet connection for easy removal without tools • Various screw geometries available • Detachable extraction unit Special advantages • Stainless chrome nickel steel design with various surface finishes • High grade dosing screws • Easy-to-clean system for rapid changeover of components • Compact design • Easy to extend thanks to modular design • Maximum dosing accuracy thanks to coarse/fine flow • Double screw version for bulk materials with poor flow properties AZODOS® type P ... DW • Used as loss-in-weight feeder • Precise online adjustment control and quick correction in case of any deviations from target values • Absolute weight recording • No false reading due to bulk weight fluctuations • No intricate calibration work • Measurement value logging with high resolution

The basic unit consists of a housing, in which one or two dosing screws are installed. The dosing screws are driven by frequency-controlled geared motors. An agitator is used to uniformly fill the dosing screws from a surge bin. Different versions and sizes of the surge bins are available, suitable for automated or manual filling. The dosing screws can be removed from the housing by pulling back with a detachable extractor, thus facilitating cleaning and replacement of individual components. AZODOS® type P ... DV operating principle The AZODOS® Type P ... DV operates in volumetric mode. The powder...

Noise level: Dosing accuracy: Dosing screw speed: Protection class: Material: for all types < 70 dB (A) Dependent on output/product. In continuous operation typical: +/- 0,5% (Namur) Control range 1:15 IP 54 in contact with product: 1.4301 (optional 1.4404) Weight: approx. 36 kg approx. 40 kg Connected load: approx. 0.21 kW approx. 0.21 kW Throughput (theoretical data: depends on screw type and product characteristics) AZODOS® type P 50/1 approx. 45 kg approx. 0.43 kW AZODOS® type P 50/2 approx. 55 kg approx. 0.55 kW High speed gear motor: 3 - 75 dmP/h 5 - 109 dmP/h Weight: Connected load: AZODOS®...

Operation and control Up to 10 dosing stations can be controlled with the central AZO®CONT controller. The system is displayed and its parameters set on an operator control panel. A PC-based visualisation system (Intouch, WinCC, etc.) can be connected corresponding to requirements. An interface for the KASTOR process control system is additionally integrated in the controller. Extensive work flows such as balancing and recipe handling can be implemented with this process control system. The material feed for replenishing the dosing units can be additionally controlled with the AZO®CONT controller....