GTX00F
20Pages

Flange type of Differential Pressure Transmitter OVERVIEW AT9000 Advanced Transmitter is a microprocessor-based smart transmitter that features high performance and excellent stability. Capable of measuring gas, liquid, and vapor, and liquid levels, it transmits 4 to 20 mA DC analog and digital signals according to the measured differential pressure. It can also execute two-way communications between the communicator, thus facilitating selfdiagnosis, range resetting, and automatic zero adjustment. FEATURES Excellent stability and high performance • Long-term stability is proven in 500,000 installations worldwide. • Unique characterization and composite semiconductor sensors realize excellent temperature and static pressure characteristics. Remote communication • Two-way communication using digital output facilitates self-diagnosis, range resetting, automatic zero adjustment, and other operations. • HART® protocol communication is available. (Option) A diverse lineup • A diverse flange lineup, ranging from small diameter 1.5 inch (40 mm) and 2 inches (50 mm) to 3 inches (80 mm), is available to meet user requirements. • A wide variety of models, including those for standard differential pressure and high differential pressure, is available to meet user requirements. • A wide variety of corrosion-resistant materials for wetted parts is also available. China RoHS This device is used in the Oil & Gas, Petrochemical, Chemical, Pulp & Paper, Food & Beverage, Machinery, Steel/Metal & Mining, and Automobile industries and therefore does not fall under the China RoHS Legislation. If this device is used in semiconductor manufacturing equipment, labeling on the device and documents for the China RoHS may be required. If such documents are required, consult an Azbil Corp. representative. HART® is a registered trademark of the HART Communication Foundation. Specifications are subject to change without notice. “This product is designed for general industrial use.” 16th edition

Azbil Corporation ATEX Flameproof and Dust Certifications Petroleum / Petrochemical / Chemical For measuring pressures, liquid levels, and ordinary surface levels in tanks of all sizes. • For lines that need transmitters resistant to chemical liquids, corrosive fluids and the like. • For measuring pressures, liquid levels, and boundary surface levels in tanks • For measuring pressure, liquid levels, and boundary surface levels in tanks of all sizes. II 1/2 G Ex d IIC T6 Tprocess=85°C -30°C < Tamb < +75°C IP66/67 II 1/2 G Ex d IIC T5 Tprocess=100°C -30°C < Tamb < +80°C IP66/67 II 1/2 G Ex d...

Azbil Corporation No. SS2-GTX00F-0100 Measuring span / Setting range / Working pressure range Certificate No. IECEx KEM 08.0001 Ga/Gb Ex d IIC T6 Tprocess=85°C -30°C < Tamb < +75°C IP66/67 Ga/Gb Ex d IIC T5 Tprocess=100°C -30°C < Tamb < +80°C IP66/67 Ga/Gb Ex d IIC T4 Tprocess=110°C -30°C < Tamb < +80°C IP66/67 Ex tD A21 IP66/67 T85 Tprocess=85°C -30°C < Tamb < +75°C Ex tD A21 IP66/67 T100 Tprocess=100°C -30°C < Tamb < +75°C Ex tD A21 IP66/67 T110 Tprocess=110°C -30°C < Tamb < +75°C Caution - Use supply wires suitable for 5°C above surrounding ambient IECEx KEM 07.0058X Zone 0 Ex ia IIC T4...

Azbil Corporation Supply voltage and load resistance Response time 17.9 to 42V DC. Reverse polarity protection is standard. A load resistance of 250 Ω or more is necessary between loops. See Figure 3. Below 150 msec. (when damping time is set to 0 sec.) Damping time Selectable from 0 to 32 sec. in ten stages Lightning protection Applicable Standards; IEC 61000-4-5 Peak value of current surge(80/20μ sec.): 6000A Operative limit Load resistance (W) Supply voltage - 12.5 0.0219 Indicator The digital LCD indicator (optional) indicates engineering units and can be set freely between -99999 and...

Azbil Corporation PHYSICAL SPECIFICATIONS TRANSMITTER HANDLING NOTES To get the most from the performance this transmitter can offer, please use it properly noting the points mentioned below. Before using it, please read the Instruction Manual. Fill fluid Silicone oil for general purpose models Fluorine oil for oxygen and chlorine models Transmitter installation notes ƽ WARNING Transmitter case Aluminum alloy, CF8M (Equivalent to 316 SST) Meter body cover SCS14A (equivalent to 316 SST) or 316 SST For Wetted parts Adapter flange (option) SCS14A (equivalent to 316 SST) Center body 316 SST...

Azbil Corporation Handling precautions for HART specification devices PERFORMANCE SPECIFICATIONS • If you need to operate with a secondary host (HART communicator, etc.), set the communication interval of the primary host (DCS, device management system) to 8 seconds or more, or suspend communication from the primary host. If the primary host repeats HART communication within 8 seconds, the request from the secondary host may not be received (communication may not be possible). • If electrical noise in the environment prevents HARTcommunications with the host, take countermeasures such as...

Azbil Corporation Reference accuracy Shown for each item are the percentage ratio for χ (kPa), which is the greatest value of either the upper range value (URV)*1, the lower range value (LRV)*2 or the span. Model GTX35F Material of Wetted Parts at Flange Side: 316 SST (Diaphragm; 316L SST), 316L SST, Material of Wetted parts at reference side: 316 SST (Diaphragm; 316L SST) Reference accuracy Linear output: (For χ > 12.5 kPa {1250 mmH2O}) ± 0.2% (*4) 12.5 ± 0.05 + 0.15 × --------- % (For χ < 12.5 kPa {1250 mmH2O}) Ambient Temperature Combined shift: (including zero and span effect (Shift...

Azbil Corporation Model GTX35F Material of Wetted Parts at Flange Side: ASTM B575 (Hastelloy C-276 equivalent), Tantalum, Material of Wetted parts at reference side: 316 SST (Diaphragm; 316L SST) Reference accuracy Linear output: (For χ > 12.5 kPa {1250 mmH2O}) ± 0.4% (*4) 12.5 ± 0.25 + 0.15 × --------- % (For χ < 12.5 kPa {1250 mmH2O}) Ambient Temperature Combined shift: (including zero and span effect (Shift from the shifts) set range) Change of 30ºC (Range from -5 to 55ºC) Static pressure effect (Shift in respect to setting range) Change of 7 MPa {70 kgf/cm2} Zero shift: Combined shift:...