MagneW Two-Wire Plus
20Pages

Specifications are subject to change without notice. - 1 - 1st Edition: Issued in May 2003 9th Edition: Issued in Oct. 2007 No. SS2-MTG200-0100 OVERVIEW The MagneW Two-wire PLUS+ is a high performance electromagnetic flowmeter based on field proven Yamatake two-wire loop powered technology. The MagneW Two-wire PLUS offers the stable and accurate measurement of a traditional magflow meter with low power consumption. The result is a lower overall cost of ownership. FEATURES Two-wire operation MagneW Two-wire PLUS+ improves its noise immunity performance by 700% maximum and 250% in average. For the spike noise, MagneW Two-wire PLUS+ improves its noise immunity performance in 250% in average. High accuracy and stable output MagneW Two-wire PLUS+ provides high accuracy (± 0.5% of rate) and its output is as stable as current four wired magnetic flowmeters. Minimum measurable fluid conductivity The MagneW Two-wire PLUS+ offers a minimum process fluid conductivity of 10ìS/cm which is the best among two-wire magflow meters thereby maximizing applicability. Wider range in size MagneW Two-wire PLUS+ offers wider range in detector size. Detector size: 2.5 to 200 mm. Wafer and flange style, integral and remote style available The MagneW Two-wire PLUS+ is available integral or remote, flanged or wafer, making the selection of the right meter for the application simple. APPLICATIONS • Corrosive liquid measurement • Chemical solution measurement • Drainage/waste disposal fluid measurement • Drinking water and waste water service • Industrial/agricultural water measurement • Seawater measurement MagneW Two-wire PLUS+ Smart Two-wire Electromagnetic Flowmeter Model MTG18A (Integral type) Model MTG14C/MTG18B (Remote type) Integral type Remote type

No. SS2-MTG200-0100 Yamatake Corporation - 2 - FUNCTIONAL SPECIFICATIONS Enclosure rating NEMA TYPE 4X, IEC IP67 Hazardous Areas certifications Integral type FM approval Class I, Division 1, Groups A, B, C & D, T4; Class II, Division 1, Groups E, F & G, T4; Class III, T4, -20°C < Tamb < +60°C Nonincendive for Class I, Division 2, Groups A, B, C & D, T4; Class II, Division 2, Groups F & G, T4; Class III, T4; Class I, Zone 2, Group IIC, T4, -20°C < Tamb < +60°C CSA certification Class I, Division 1, Groups A, B, C & D, T4; Class II, Division 1, Groups E, F & G, T4; Class III, T4, -20°C < Tamb...

Yamatake Corporation No. SS2-MTG200-0100 - 3 - Flow unit Volume flow:m³, L, cm³, G (gallon), mG, kG, B (barrel), IG (imperial gallon), mIG, kIG Mass flow: t, kg, g, lb Time: d, h, min., s Display Display: LCD Main display: 7-segment, 8 digits Sub display: 16 digits, 2 lines Display contents: Simultaneously displays % flow rate, Actual flow rate (eng. unit) and Totalized value. Data setting Operation by four key switches Damping Adjustable between 0.5 and 199.9 seconds. Low flow cutoff Adjustable between 0 and 10% of setting range. Below selected value, output is driven to the zero flow rate...

Yamatake Corporation No. SS2-MTG200-0100 - 5 - PERFORMANCE SPECIFICATIONS Analog output accuracy Size: 2.5, 5 mm (0.1, 0.2 inch) Vs = velocity of setting range (m/s) Size: 10, 15 mm (3/8, 1/2 inch) Vs = velocity of setting range (m/s) Size: 25 to 200 mm (1 to 8 inches) Vs = velocity of setting range (m/s) PHYSICAL SPECIFICATIONS Converter case finishing Standard Baked acrylic paint Corrosion-proof Baked epoxy paint Converter case material Aluminum alloy Display cover material Tempered glass Terminal box finishing (Model MTG18B only) Standard: Baked acrylic paint Corrosion-proof: Baked epoxy...

No. SS2-MTG200-0100 Yamatake Corporation - 6 - MODEL SELECTION MagneW Two-wire PLUS+ Model MTG18A - I II III IV V VI VII VIII IX X XI - XII XIII - Options (some options can be selected per each model) Basic model no. Selections Optional selections Options MTG18A - - I Line size 2.5 mm (0.1 inch) (flange type only) 002 *1 X None Options 5 mm (0.2 inch) (flange type only) 005 *1 A Test report 10 mm (3/8 inch) (flange type only) 010 *1 B Traceability certificate 15 mm (0.5 inch) (flange type only) 015 *1 C Material certificate (electrode/ 25 mm (1 inch) 025 grounding ring) 40 mm (1½ inches)...

Yamatake Corporation No. SS2-MTG200-0100 - 7 - MagneW Two-wire PLUS+ Wafer/Flange remote type converter Model MTG14C - I II III IV - Options (some options can be selected per each model) Basic model no. Selections Options Note) *1: Must be selected if tagging is required. *2: Must select “Wiring connection D”. MagneW Two-wire PLUS+ Wafer/Flange remote type cable Model SMC11 - I II III Basic model no. Selections MTG14C - I Analog output / communication Volume flow 4-20 mA DC output / with SFC communication A Volume flow DE output / with communication C Volume flow 4-20 mA DC output / with...

No. SS2-MTG200-0100 Yamatake Corporation - 8 - MagneW Two-wire PLUS+ Wafer/Flange remote type detector Model MTG18B - I II III IV V VI VII VIII IX - Options (some options can be selected per each model) Basic model no. Selections Options MTG18B - I Diameter 10 mm (3/8 inch) 010 X None Options 15 mm (1/2 inch) 015 A Test report 25 mm (1 inch) 025 B Traceability certificate 40 mm (1½ inches) 040 C Material certificate (electrode/ grounding 50 mm (2 inches) 050 ring) 65 mm (2½ inches) 065 G Gasket for plastic piping 80 mm (3 inches) 080 K With the Tag number plate on the 100 mm (4 inches) 100...

Yamatake Corporation No. SS2-MTG200-0100 - 9 - DIMENSIONS All dimensions are in millimeters, dimensions in brackets () are in inches (inch). Model MTG18A - Flange type size 2.5 mm (0.1 inch) to 15 mm (1/2 inch) - Flange type size 25 mm (1 inch) Note 1 • When grounding ring material is SUS316, gasket dimension is not included to the face-to-face dimension. •When grounding ring material is other than SUS316, a 3 mm of Teflon gasket dimension is included to the face-to-face dimension. Table 1 Size mm (inch) Model no. J1 J2 J3 J4 J5 A1 A2 D1/D2 D3/D4 Flange rating JIS ANSI DIN 10K 20K 30K 10K...