azbll Digital Output Module ■■■ Digital output module (16 outputs) C€ cWus Model Selection Network Instrumentation Module Better Networks for Better Results GOOD DESIGN External dimensions Specifications overview Individual specifications # Output specifications Number of outputs Common terminal Isolation between channels External power rated voltage Allowable output current Output type # Event output Number of outputs Insulation Output type Rated contact voltage Allowable output current 16 One for every eight channeles Channels 1-8 isolated from 9-16 24 Vdc 100 mAdc max./1ch DY1:Transistor(sink type) DY2:Transistor(source type) 1 Yes Photo MOS relay output (non-voltage from A contact) 12-24 Vdc 100 mAdc max. Other Power consumption 4W max. (under operating conditions) Communication specifications # Ethernet Protocol • RS-485 Protocol Signal level Communication /synchronization type Maximum cable length Terminating resistor Transmission speed MODBUS/TCP, CPL/TCP MODBUS (RTU/ASCII) CPL RS-485 - compliant Half-duplex, start/stop synchronization 500 m External (150 Q, 1/2 W min.) 115,200 bps max. C€ : Product approved with the CE Marking, : Product listed by UL covering CSA requirements. []| : These products are compliant with Korean safety standards. Engineering Tools Tools for monitoring and initial configuration Please, read ‘Terms and Conditions' from following URL before the order and use. http://www.azbil.com/products/bi/order. html __"__ SDC, PREXION and Harmonas-DEO are registered trademarks of Azbil Corporation in Japan. [Notice] Specifications are subject to change without notice. Ethernet is a registered trademark of XEROX Corporation. No part of this publication may be reproduced or duplicated Other product names, model numbers and company names may be trademarks of the respective company. without the prior written permission of Azbil Corporation. Azbil Corporation Advanced Automation Company Yamatake Corporation changed its name to Azbil Corporation on April 1,2012. 1-12-2 Kawana, Fujisawa Kanagawa 251-8522 Japan URL: http://www.azbil.com

Enter the World of New Instrumentation The PID controller has evolved, and long-awaited instrumentation for connecting networks has arrived. 1. All modules have LED indicators for easy viewing of operation status. 2. Compact and highly functional supervisor module 3. Easy to operate, and can also be used as a standalone units. 4. I/O signals can be exchanged between modules (except NX-D15). 5. With work efficiency as a key design principle, modules can be installed and uninstalled without using tools. 6. Daisy chain Ethernet connection saves space and reduces wiring. Network Instrumentation Module...

Support for High-capacity Communication/ Ethernet Communication Another manufacturer’s programmable display Harmonized Automation System–Dependable Open Harmonas-DEO™ General Purpose Linker Ⅱ DGPL Ⅱ Another manufacturer’s programmable display Digital Indicating Controller SDC Series Note: There is a limit on the number of host connections. Digital MASS Flow Controller MQV Series Standard Ethernet Hardware Note: The number of connectable modules is limited. Full-fledged Distributed Layout With Ethernet connections, there is no difference in function between distributed and contiguous layouts....

Optimization Management Control of Temperature Difference between Zones Mutual interference among multiple control loops is prevented, and a constant difference in temperature is maintained between the controlled variables (temperatures) of the loops when the temperature is rising or when responding to disturbances. Yield can be expected to improve due to energy savings and quality improvement. Control of temperature difference between zones Normal control More Environmentally Friendly Control Peak Power Suppression Control This function controls peak power by means of time-sharing of the output...

Advanced Functions Function A Added as a measuring instrument Existing control unchanged! Types of logical operations (4) Existing control panel Control panel Control panel Close door Lock door Logical operation Start heat treatment Timer countdown Logical operation Count-up / confirmation of temperature drop DO-OFF Unlock door SSR: solid state relay. SSC: solid state contactor. CT : current transformer. Data Transfer between Modules Transfer of control output Outputs 5~8 Outputs 9~12 Outputs 13~16 Control output Digital data Alarm output Note: Does not apply to supervisor modules. Utility area...

Hardware Hardware Compact body (30 x 100 x 104 mm) Up to 4 analog inputs and 4 analog outputs 4 current transformer inputs (option) High accuracy: 0.1% FS* High-speed sampling: 100 ms* Easy Assembly Each module consists of a base, a body, and a terminal block. Modules can be easily installed and uninstalled without tools. Analog output AC current effective value Event processing Logic processing Transfer data between modules? Use redundant communication between modules (ring connection)? Effective value calculation Time proportioning output Power supply, control, and communication functions are...

Module Selection Flow Chart [ for RS-485 communication Standard conditions Ambient temperature 23 ± 20C Ambient humidity 60 ± 5% RH (without condensation) Rated supply voltage 24 Vdc Mounting angle Reference plane ± 3° Operating conditions (below the installed module) Ambient humidity 10 to 90%RH (without condensation) Allowable supply voltage 21.6 to 26.4 Vdc Mounting angle Reference plane ± 3° Insulation resistance Dielectric strength Case material Mounting method 500 Vdc, 20 MO min. 500 Vac, 1min Modified PPO resin DIN rail Controller Module ■■■ Process controller (4-channel or 2-channel)...

External dimensions External dimensions Communication Adaptor ■■■ Ethernet interface (1 port) Terminal Adaptor ■■■ An adaptor used as a ring communications terminal Model Selection Specifications overview External dimensions Individual specifications (Communication adapter) # Ethernet interface Number of ports Communication path type Connector Cable 1 IEEE802.3u 100BASE-TX (full duplex, with Auto-MDI/MDI-X) RJ-45 UPT cable (4P) Category 5e min. (straight) (both ends, ANSI/TIA/ EIA-568-B) Communication Box ■■■ Ethernet interface (switching hub) C€ cWus Model Selection Specifications overview Individual...