r ENGINEERING made in Germany with limit value indication - In a robust IP65 housing and versatile in use TECHNOLOGIES MEMBER

HE 5411 – for use in dust extraction systems and building automation Precise differential pressure measurement under demanding ambient conditions For precise and reliable differential pressure measurement, especially with very small measured values in the millibar range, the shortest possible measuring lines are crucial. Installing the transmitter close to the measuring point prevents falsification of the measurement results, which can be caused by dust deposits or condensation in the lines. In practice, it is often difficult to select the optimum installation location. Ambient conditions such...

Precise detection of differential pressures and optimum adjustment of the measuring range The HE 5411 accurately measures the differential, positive and negative pressure between two pressure inputs and converts the values into a linear or square root output signal of 0(4)...20 mA or 0...10 V. The 4-digit 7-segment display (Basic and Premium versions) also allows the measured value to be displayed on site in the measuring ranges from ± 1.25 mbar to ± 1000 mbar or ± 125 Pa to 10,000 Pa. Even the smallest pressure deviations are recorded quickly and with long-term stability. Can be used in ATEX...

HE 5411 – for use in dust extraction systems and building automation The details There are 3 variants to choose from for different requirements – Lite, Basic und Premium. Each device version can be opened with screwless hinge technology to carry out settings such as measuring ranges, zero point, test mode (output of a 50 % measured value signal) and the PC connection. Depending on the application, the following measuring ranges can be ordered: ± 1.25 (without ATEX approval) / ± 2.5 / ± 5 / ± 10 / ± 25 / ± 50 / ± 100 / ±350 / ± 1000 mbar. The pressure connection is made via 6 mm quick-release...

S Quick commissioning and installation thanks to space-saving design, tool-free connector plugs and screwless housing (hinge technology) S Quick-release fasteners for a secure hold of the pressure hoses S 2 versions for suitable voltage supply: 24 V DC and 100...240 V AC S EasyTool Controls 4.0 with wired or wireless data transmission for extended and customised setting options S Compact design in IP65 housing *5411 Lite and Basic with 19...36 V DC supply voltage can be used with a closed housing for use in ATEX zone 2 and 22. HE 5411 Lite, Basic and Premium with 100...240 V AC and Premium with...

HE 5411 - for use in dust extraction systems and building automation Combination products & accessories For very difficult cases - HE 5422MR The HE 5422MR with measuring hose cleaning Is Ideal for gases with a high dust content or condensate build-up In the measuring hoses. This Is connected to compressed air and blows the measuring line free at regular Intervals. HE 5422MR covers differential pressure ranges from 0...35 mbar, 0...90 mbar or 0...450 mbar. FREE unlimited TEST You can find the freely available software for testing on our website at »>Downloads EasyTool Controls 4.0 Detailed and...

* *The overpressure is defined as the maximum pressure that may be applied to a pressure connection so that the sensor maintains the specifications as soon as the pressure is within the operating pressure range again. Higher pressures can lead to lasting damage on the product . Subject to errors and technical modifications • Independent filter monitoring (police filter) • Pressure/suction control fans (pressure cabins) • Overpressure and underpressure measurement • Volume flow measurement/control • Level measurement (bubblinge-through) • Clean room pressure equalisation • Burner vacuum measurement...

More products and services from AXXERON Hesch electronics can be found on our website Heiko Wilkens, Dipl.-Ing. (FH) +49 (0) 162 1338 107 [email protected] Rolf Bürssner, Dipl.-Ing. (FH) +49 (0) 173 2439 388 [email protected] AXXERON HESCH electronics GmbH Headquarter Boschstraße 8 | 31535 Neustadt [email protected] +49 (0) 5032 9535-0 Branch Nord Stöckenhoop 6 | 21465 Wentorf +49 (0) 40 727 57-08 [email protected] ENGINEERING made in Germany