■ Data logger for connecting standard M-Bus energy meters such as electricity, gas and water meters via network to the Internet ■ Configuration via comfortable web interface ■ The meter data is stored at adjustable intervals on the removable microSD card ■ The meter data can be sent cyclically to any, even several, email recipients ■ The meter data can be stored on any FTP server ■ Automatic scan for connected meters ■ Live display of all meter data in the web interface ■ Network operation DHCP or fixed IP adjustable ■ Automatic identification of the MT-5100 Logger in the network with included Axotec Device Scanner software The MT-5100 M-Bus Datalogger automatically collects data from connected M-Bus meters at adjustable intervals and stores them on a removable standard microSD card. In addition, the meter data can be sent cyclically to any e-mail address and FTP server at the same time. There are a variety of settings available for each meter. For example, it is possible to choose whether and at what fixed interval the data is logged or whether it is logged on fixed dates. Comfortable web interface for easy configuration All settings of the MT-5100 data logger are made via a comfortable web interface. Upon request, the M-Bus is completely scanned for connected meters. The M-Bus counter address is detected and all counters are taken over in the counter list. Each counter displays the respective data including the current counter values. The network interface can be configured with both DHCP operation and fixed IP address. The supplied Device Scanner software automatically sets the IP address of the device. Meter data acquisition and data transmission flexibly adjustable The MT-5100 data logger allows you to save the counter data cyclically at adjustable intervals on a microSD card. In addition, the meter data can be sent to one or several e-mail recipients. In addition, the meter data can also be uploaded to any FTP server. All possibilities of data storage and data transmission are available simultaneously. Firmware update during operation The MT-5100 has a comfortable firmware update function. A web interface can be used to check if a new firmware is available. Optionally, an update of the firmware can be made. The update is carried out during operation without interruption. All settings and log data are retained after a firmware update. Axotec Hightech made applicable [email protected] • http://www.axotec.com

Technical data MT-5100 M-Bus Datalogger Axotec, Hightech made applicable Axotec Technologies GmbH Sudetenstrafte 88 D-82538 Geretsried Technical specifications are subject to change without prior notice! Axotec is registered Trademark. All product and trademarks are properties of their respective owners..