MINISPEED EUROCARD
2Pages

® : External forced cooling required 1 : Recommended DC power supply * : Peak current = x 1 second R : External Power resistor AXOR IND. viale Stazione, 5 - 36054 Montebello Vic.no - Vicenza - Italy - phone: (+39) 0444 440441 - www.axorindustries.com - e-mail: info@axorindustries.com (RKM) Standard Features ♦ Multi-axis rack for Eurocard Drives and Dumping ♦ Built-in Power Supply ♦ Available from 2 to 11 axis without Dumping Circuit or 10 axis with Dumping Circuit (7 axis with encoder option or booster) (MS) Standard Features ♦ Eurocard DC servodrive ♦ Driving motor range up to 15 Nm ♦ Single DC power supply ♦ Operating: frequency 11KHz temperature 0 - 40°C humidity 10 - 95% ♦ T0 Tachogenerator feedback ♦ RD Differential reference control mode (MS) Options ♦ A0 Armature Feedback ♦ E0 Encoder Feedback ♦ PD PWM + Direction ♦ IO Demand current (torque mode) (SHR) Standard Features ♦ Eurocard Dumping card ♦ Single DC power supply ♦ Fully protected against: - Over / under voltage - Max braking power capacity - Power resistor short circuiting ♦ Signaling leds: - OK (green) - PA = prealarm (orange) - MAX B = maximum braking (red) ♦ Dumping power: - up to 200W with internal resistors - up to 800W with external resistors

Specifications subject to change without notice. Axor does not assume liability for errors or inaccuracies. © COPYRIGHT 2019 AXOR IND . All rights reserved. Printed in Italy 01/2019 AXOR INDUSTRIES* Current monitor ( I pk = 7.5V ) Protection active Request current Common Zero signal 10V ~I Max. 2.5mA +10V Enable Input reference + REF Input reference - REF Tacho generator input -Tacho generator input + • + M - M dUD NOTE: For correct wiring see MINISPEED service manual (also for the sizing of F2 fuses and TM or TT transformer) MS - 200 - 10/20 - B - S - 1000 / T0 - RD SHR - 200 / 200 - S - N...