www.axiomtek.com iCON-101CU 1-port CAN to USB Industrial Converter (-40°C ~ +70°C) Features Extended Temperature Full compliance with USB 1.1/2.0 (fully speed) Full compliance with CAN 2.0A and CAN 2.0B D-sub DB9 CAN port supports 3KV isolation Easily setup to CAN terminator by software configuring CAN transmission speed up to 1Mbps Powered by the USB bus USB type B connector Complies with Class 1, DIV II minimum withdrawal requirement of 15N Provides DIN-Rail mounting, Status LED indicators Driver supports Windows® Server 2008; 2003/Vista/2000/XP/7 and Linux OS -40°C ~ 70°C wide temperature operating suitable for industrial automation and power automation field applications Introduction The CAN (Controller Area Network) is a serial bus system and is usually used in structuring intelligent industrial device networks and building smart automatic control systems. The iCON-101CU is a cost-efficient industrial converter for pairs to PC using the standard USB interface. It supports CAN monitor tool and displays the CAN message received in Decimal or HEX mode. This converter shows the time stamp of each receiving message. The GUI management program and programming guide both are ready for use. The CAN host, monitor or HMI can access & control CAN device through iCON-101CU. Operating systems support includes Windows® 98/ME/2000/XP. Specifications Connector Isolation Receive Buffer NVRAM Max Data Flow Support Protocol Terminator Resistor Baud Rate 9-pin male D-Sub 3 KVrms for DC-DC and photocoupler 1000 data frames 64Kbyte for users define 10000 fps (CAN bus) CAN 2.0A/2.0B Software configurable Power/firmware updating, CAN TX/RCV, CAN status for normal and error, USB TX/RCV, terminator status pp Windows® Server 2008; 2003/Vista/2000/XP/7 and Linux OS 5k,10k, 20k, 40k, 50k, 80k, 100k,125k, 200k, 250k, 400k, 500k, 600k, 800k ,1Mbps and user defined Weight Installation Support Protocol USB 1.1/2.0 Connector USB type B Receiver Buffer 1000 data frames Power Consumption 465 0.7W max. * All specifications and photos are subject to change without notice. Casing Dimension Operating Temperature Storage Temperature Humidity Emission Compliance Aluminum case 70 mm (W) x 110 mm (D) x 30 mm (H) (2.75" (W) x 4.33" (D) x 1.18" (H)) 0.25 kg (0.55 lb) DIN-rail and panel mount -40°C to +70°C (-40°F to +167°F) -40°C to +85°C (-40°F to 185°F) 5% ~ 95% (non-condensing) CE class A, FCC class A

2 Industrial Connectivity Overview Ordering Information iCON-101CU 1-port CAN to USB industrial converter Industrial Ethernet Switches CAN Network CAN Device USB Industrial Converters CAN Device iCON-101CU CAN Device Dimensions * All specifications and photos are subject to change without notice. © 2012 Axiomtek Co., Ltd. All rights reserved. 466