CHRONECT Workstation MCPD
1 / 5Pages

CHRONECT Workstation MCPD Product information

CHRONECT Workstation MCPD Product information Introduction 3-monochloro-1,2-propanediol (3-MCPD), 2monochloro-1,3-propanediol (2-MCPD) and glycidol belong to the group of production-related contaminants in foodstuffs. MCPD fatty acid esters can be formed during refining at high temperatures in the presence of chloride containing salts. However, refining is a necessary chemical and physical refining process in the production of many oils. It is only through this temperature treatment that undesirable odorants and flavorings as well as any traces of toxic compounds such as pesticides, heavy...

CHRONECT Workstation MCPD Product information Table 1: Methods for the determination of MCPD by GC-MS. Values when using two injection units. Method name Based on the official method Based on the official method System setup The CHRONECT Workstation MCPD consists of two general components: First Sample result after Special modules Heated Tray at 40 °C Cooled Tray at -22 °C with a specially adapted backflush kit for backflushing matrix components. This kit is installed into the GC-MS instrument during installation. CHRONECT Robotic sample robot The used CHRONECT Robotic sample robot can be...

CHRONECT Workstation MCPD Product information Figure 2: CHRONECT Workstation MCPD with Shimadzu GCMS-TQ. run is repeated in a Site Acceptance Test (SAT) in the customer laboratory. In this way the analytical accuracy is proven. The system is ready for use immediately after installation. The concept of FAT/SAT ensures that the systems are directly integrated into the laboratory workflow and are used productively as quickly as possible. Training and maintenance offers ensure the permanent uptime and ensure that the necessary knowledge for the operation of the system is available even in case...

CHRONECT Workstation MCPD Product information Technical data Specifications Supported methods Number of samples per day Robot configurations Supported GC-MS devices LOQ in fat content Values • AOCS Cd 29a-13 (Unilever) • AOCS Cd 29b-13 (3-in-1) • AOCS Cd 29c-13 (DGF C-VI 18)* • Methode according to Zwagerman *modified as DGF Fast & Clean and original depending on method and robot, up to 37 samples possible • width 120 cm, 160 or 200 cm • single or Dual head model (typical model 160 cm DualHead) • Bruker EVOQ GC-TQ (also as part of a complete offer) • Shimadzu TQ 8040/8050 series • Agilent...