MX 9000 Process Monitor Ideal for any industrial flow measurement application where a simple, compact & easy-to-use remote flow monitor is required. Features: • Rate, total, limit, batch and ratio options • Single or dual channel • Two programmable Form C relay outputs (optional) • One or two assignable 4-20 mA output (optional) • Easy-to-read LCD display with color backlight that changes color for warning or alarm • Batch controller - stores up to 20 batch recipes Applications: The MX 9000 Process Monitor is a versatile, multi-functional device that helps you track rate, total, limit, ratio, and more. Standard unit is one channel. Optional two channels allow you to monitor dual flows, and display them in a number of ways: separately, as a sum (for example in total material use), as a difference (as in fuel consumption), or as a ratio of product A/product B. Also use the MX 9000 to detect bi-directional flow when A and B channel signals are available from a single flow meter. The MX 9000 has a number of related functions that add to its capabilities. Four model variations (see reverse side) give the MX 9000 the capability of performing limit, warning and alarm duties. Benefits: MONITORING VERSATILITY The MX 9000 is available with one or two channels, to monitor: • Flow rate from one or two meters • Flow volume (sum or difference of two flows) • Ratio (product A/product B) CUSTOMIZABLE HOUSING OPTIONS The MX 9000 is available in custom enclosures to meet your application requirements. Technical Specifications: • Power Requirement: 14 to 16 VAC/250mA, or 18-24 VDC/200mA (customer supplied), or 120/240 VAC (optional). *All units are shipped with 120VAC/1000mA wall transformer. • Flow Sensor Power Supplies: (2) @ 15 VDC / up to 50 mA each • Frequency Inputs: 0-4 KHz, sine, square or saw-tooth; 4 volts minimum amplitude; 3.3 Kohm maximum impedance • 4-20 mA Analog Output: External-powered loop output into a maximum 500 ohm load impedance with 24 VDC supply. 2nd loop output optional. • Integrated Linearization: Maximum 30-point linearization table for improved accuracy over range. EASY REMOTE PROGRAMMING This unit can be easily programmed to display what you need in a variety of engineering units. UP AND RUNNING IN MINUTES Easy plug-in installation. A quick setup procedure allows you to have the flow monitor working with just a few simple programming steps. © 2013 AW-Lake Company All rights reserved.

MX 9000 Process Monitor Terminal Assignments: Upper Connector Option Board Dependent Option board Main board Monitor Dimensions: Lower Connector +18-24VDC/16VAC DC COM/16VAC +15VDC Out Sig. 1 In Sig. 1 Common +15VDC Out Sig. 2 In Sig. 2 Common EXT Reset + EXT Reset I + Out 1 I - Out 2 Part Number Guide: MX 9 – – Main Board: S = Single channel flow/total D = Dual channel flow/total R = Ratio monitor B = Batch controller Output: 4 = 4-20mA output X = No output Option board Option board Main board Main board Products may be subject to change without notice Contact factory for the most up-to-date...