*mydirectindustry

JVM

JVM

Product catalog summary

Technical Specifications:

Flow ranges from 0.001 to 20 GPM with six available flow ranges.
Accuracy of ± 0.5% of reading.
Constructed from stainless steel with a pressure rating up to 5000 PSI.
Available sensors include pulse, mA, and voltage sensors.
Economical cost and bi-directional flow capabilities.

JVM Meter Overview:

The JVM Series flow meters are economical and reliable positive displacement flow meters suitable for various paints and industrial fluids. They operate on the principle of a gear pump in reverse, where the medium drives the gears. A non-intrusive sensor detects gear movement, producing a square wave pulse proportional to the flow rate, ensuring high accuracy. The meters are made from stainless steel with tungsten carbide shafts and bearings, recommended for non-lubricating fluids like paints, adhesives, sealants, and resins. Available sensors include frequency output, analog output, fiber optic, and intrinsically safe models.

Materials of Construction:

Body: 303 Stainless Steel
Gear: Stainless Steel
O-Ring: PTFE standard, FKM optional
Bearings and Shafts: Tungsten Carbide

Performance and Specifications:

Accuracy: ± 0.5% over 10:1 turndown, ± 1% over full range with 30 cP fluid.
Repeatability: ± 0.1%
Temperature: Up to 180°C / 350°F
Ports: NPT, BSPP available, specify upon ordering.

Sensor Types and Features:

HEF-xx: Single Sensor with standard frequency output.
DH-xx: Dual Sensor with x2 resolution, single or quadrature frequency output.
MAG-xx: Hall Effect Single Sensor with frequency output and conduit connection.
FIP-xxx: Meter Mounted Analog Output Sensor with 3 wire analog output, current or voltage.
CAPM-xx: Single Sensor with frequency output.
CAPM-15: High Temp Sensor up to 400°F for Stainless Steel with separated pickup & amplifier module.
FOP-20: Fiber Optic Sensor with fully isolated optical signal.

Meter Technical Data:

Model	Range (GPM)	Impulse/Gallon	Impulse/cc	Diameter (in)	Ports	Filtration (micron)	Weight (lbs)	Pressure Rating (PSI)
JVM-01CG	0.001 to 0.25	155,000	41	3.0	1/4”	120	3.0	5,000
JVM-10CG	0.003 to 0.5	100,300	26.5	3.0	1/4”	120	2.9	5,000
JVM-15CG	0.01 to 1.0	31,000	8.2	3.3	1/4”	120	4.5	5,000
JVM-20CG	0.02 to 2.0	15,900	4.2	3.3	1/4”	120	4.9	5,000
JVM-30CG	0.1 to 7.0	6,600	1.7	3.3	1/2”	120	6.3	5,000
JVM-60CG	0.1 to 20	1,800	0.47	4.9	3/4”	175	20.0	5,000

Catalog excerpts

Rev. 05/12 JVM Series Positive Displacement Flow Meter Technical Specifications: · · · · Flow ranges 0.001 to 20 GPM Accuracy ± 0.5% of reading Pressure rating up to 5000 PSI Economical cost · · · · 6 Flow ranges available Stainless Steel construction Pulse, mA and Voltage Sensors available Bi-directional flow capabilities What is a JVM Meter? The JVM Series flow meters are economical and reliable positive displacement flow meters suitable for a wide variety of paints and industrial fluids. The principal of operation is that of a gear pump, but in reverse; instead of the gears driving the medium, the medium drives the gears. A non-intrusive sensor detects the movement of the gears and produces a square wave pulse for each gear tooth. The resulting pulse train is proportional to the actual flow rate and provides a highly accurate representation of the fluid flow. The body and gears are manufactured from stainless steel with tungsten carbide shafts and tungsten carbide bearings. The JVM meters are recommended for non-lubricating fluids such as paints, adhesives, sealants and resins. Sensors available include frequency output, analog output, fiber optic and intrinsically safe models. 8809 Industrial Drive, Franksville, WI 53126 Phone: (262) 884-9800 Fax: (262) 884-9810 Email: [email protected] www.awflowmeters.com

Open the catalog to page 1

Rev. 05/12 JVM Series Positive Displacement Flow Meter Meter Technical Data JVM-CG Materials of Construction: Body: JVM - 303 SS Gear: Stainless Steel O-Ring: PTFE standard FKM optional Bearings: Tungsten Carbide Shafts: Tungsten Carbide Accuracy: Repeatability: Temperature: Ports: ± 0.5% over 10:1 turndown ± 1% over full range with 30 cP fluid ± 0.1% 180° C / 350° F NPT, BSPP available Specify upon ordering Impulse/ cc Dia (in) Ports Filtration (micron) Wt (lbs) 155,000 41 3.0 1/4” 120 3.0 Pressure Rating (PSI) 5,000 100,300 26.5 3.0 1/4” 120 2.9 5,000 0.01 to 1.0 31,000 8.2 3.3 1/4” 120 4.5...

Open the catalog to page 2

All AW-Lake Company catalogs and technical brochures