*mydirectindustry

JV-KG

Product catalog summary

Technical Specifications:

Flow ranges from 0.003 to 120.0 GPM with six available flow ranges.
Accuracy of ± 0.5% of reading.
Constructed with Aluminum, 303, and 316 Stainless Steel bodies.
Pressure rating up to 5,000 PSI.
Available with Pulse, mA, and Voltage Sensors.
Bi-Directional flow capabilities and economical cost.

JV-KG Meter Overview:

The JV-KG Series is a positive displacement meter known for its affordability and accuracy. It maintains consistent accuracy despite changing viscosity conditions and offers a large turndown range, making it a suitable replacement for older turbine technology. The meter is robust and provides excellent dynamic response, ideal for measuring various nonabrasive lubricating fluids. It is easy to install without the need for straight run piping and supports bi-directional flow without damaging internal parts. Additional features include non-intrusive sensors, panel displays, and electronic modules.

Materials of Construction:

Body: Aluminum (JVA), 303 Stainless Steel (JVM), 316 Stainless Steel (JVS).
Gear: Stainless Steel.
O-Ring: PTFE standard, FKM optional.
Bearings: Stainless Steel.

Performance and Specifications:

Accuracy: ± 0.5% over 10:1 turndown, ± 1% over full range with 30cP fluid.
Repeatability: ± 0.1%.
Maximum Fluid Temperature: 185°F for Aluminum Body, 400°F for Stainless Body.

Flow Meter Models and Specifications:

Model	Range (GPM)	Impulse/Gallon	Impulse/cc	Diameter (in)	Height (in)	Ports	Filtration (micron)	Pressure Rating (PSI)
JV#-12KG	0.003-0.8	53,000	14	3.0	2.2	1/4”	30	5,000
JV#-20KG	0.01-2.0	15,900	4.2	3.3	2.2	1/4”	30	5,000
JV#-30KG	0.03-7.0	6,600	1.7	3.3	2.6	1/2”	30	5,000
JV#-60KG	0.05-20	1,800	0.47	4.9	4.25	3/4”	30	5,000
JV#-80KL	0.5-60	1,600~	0.42	8.4	5.5	1-1/4”	200	5,000
JV#-90KL	1.0-120	800~	0.21	8.4	7.0	1-1/4”	200	5,000

Sensor Types and Features:

HEF-xx: Single Sensor with standard frequency output.
DH-xx: Dual Sensor with x2 resolution, single or quadrature frequency output.
MAG-xx: Hall Effect Single Sensor with frequency output and conduit connection.
FIP-xxx: Meter Mounted Analog Output Sensor with 3 wire analog output, current or voltage.
CAPM-xx: Single Sensor with frequency output.
CAPM-15: High Temp Sensor up to 400°F for Stainless Steel with separated pickup & amplifier module.
QUAD-4: Quad Sensor with x4 Resolution, single or quadrature frequency for -80KL & -90KL models.

Catalog excerpts

Rev. 05/12 JV-KG Series Positive Displacement Flow Meter Technical Specifications: · · · · Flow ranges 0.003 to 120.0 GPM Accuracy ± 0.5% of reading Pressure rating up to 5,000 PSI Bi-Directional flow capabilities · · · · Six Flow Ranges available Aluminum, 303 and 316 SS bodies Pulse, mA and Voltage Sensors available Economical cost What is a JV-KG Meter? The JV-KG Series represents a positive displacement meter that is affordable and accurate. One primary feature is the ability to maintain consistent accuracy despite changing viscosity conditions. This reliability, coupled with a large turndown range, offers an affordable replacement for older turbine technology. The meter’s solid construction and excellent dynamic response are well suited to the measurement of oil, grease, fuel, solvents, polyurethanes, brake fluid, skydrol as well as other nonabrasive lubricating fluids. Since there is no need for straight run piping upstream or downstream of the flow meter, the JV-KG flow meters are simple to use and to install. The meters produce good resolution and high accuracy at low flow rates. Flow may be bi-directional, such as for cylinder position measurements, without damage to internal parts. Non-intrusive sensors, panel displays and electronic modules can be added to complete this superior value package. 8809 Industrial Drive, Franksville, WI 53126 Phone: (262) 884-9800 Fax: (262) 884-9810 Email: [email protected] www.awflowmeters.com

Open the catalog to page 1

Rev. 05/12 JV-KG Series Positive Displacement Flow Meter Meter Technical Data Materials of Construction: Body: JVA - Aluminum JVM - 303 Stainless Steel JVS - 316 Stainless Steel Gear: Stainless Steel O-Ring: PTFE standard FKM optional Stainless Steel ± 0.5% over 10:1 turndown ± 1% over full range with 30cP fluid Repeatability: ± 0.1% Max Fluid Temperature: Meter 185° F Aluminum Body Meter 400° F Stainless Body Bearings: Accuracy: Meter Type Range Gal/Min Impulse/ Gallon Impulse/ cc Dia (in) HGT (in) Ports Filtration (micron) JV#-12KG JV#-20KG JV#-30KG JV#-60KG JV#-80KL JV#-90KL 0.003-0.8 0.01-2.0...

Open the catalog to page 2

All AW-Lake Company catalogs and technical brochures