THE EDGE FLOW SENSOR – WITH BLUETOOTH
3Pages

THE EDGE FLOW SENSOR - WITH BLUETOOTH Ideal for use with all AW Gear Meter and Turbine flow meter applications requiring an analog, pulse, or Modbus output. APPLICATIONS The EDGE Flow Sensor is ideal in general applications when sending an analog, pulse or modbus signal to a PLC or other control system. FEATURES • Analog output signal defaults to 4-20mA and 0-10V (0-5V, 1-5V & 2-10V selectable through PC Toolkit or "AWL Mobile Toolkit" mobile app) • Frequency output to 5KHz, flow dependent • Modbus communication • Excellent linearity, high temperature stability and long-term stability • Powered by 12-24VDC • 16-bit analog output resolution • Bluetooth enabled for wireless setup from a mobile device (can be disabled by factory) • Password protected Bluetooth communication • Connect sensor to PC via standard USB-C cable • Firmware can be updated by users via the PC Toolkit TECHNICAL SPECIFICATIONS Streamlined Setup with Bluetooth* These pickups are equipped with Bluetooth, making setup and scaling much easier. Setup from the “AWL Mobile Toolkit” application on a mobile device or the AW-Lake Toolkit PC software. You no longer need to walk from the device to your monitoring equipment when fine-tuning your adjustments. *Pulse output version does not come standard with Bluetooth, but can be added. Modbus Interface With Modbus option, users can pull key parameter values via digital serial interface. Linearizer To improve output accuracy with some flow meters which are non-linear, a 10-point linearization table can be utilized through the Bluetooth app and PC Toolkit. Wireless Hand-Held Display Using the Bluetooth mobile app on your phone, you have a wireless flow monitor in your hand! Easy Interface Verification With the ability to force the sensor to output a frequency or analog signal, proper connection to user interface can be verified without need to run fluid flow. Supply Voltage Range 12-24VDC ±10% Max current draw 40-100mA (model-specific, contact factory) Analog Output Options 4-20mA & 0-10V - Default 0-5V, 1-5V & 2-10V - Available through PC Toolkit or mobile app Standard Max Output +2.5% of max scaling (20.5mA/5.125V /10.25V) Error Indication +10% of max scaling (22mA/5.5V/11V) Analog Output Resolution 16 bit Analog Output Update Time 100mSec minimum Ambient Temperature -40°F to 185°F (-40°C to 85°C) Pulse/Frequency Output: Push/Pull output - default Sinking or Sourcing optional. Easy setup through PC Toolkit. 2440 W. Corporate Preserve Dr. #600, Oak Creek, WI 53154 | www.aw-lake.com A AW-LAKE S PROCESS FLOW MEASUREMENT ©2020 AW-Lake. All rights reserved. Doc ID: EDGDS20 Rev 8.17

THE EDGE FLOW SENSOR - WITH BLUETOOTH Ideal for use with all AW Gear Meter and Turbine flow meter applications requiring an analog, pulse, or Modbus output. The EDGE Flow Rate INDUSTRY STANDARD M12-A CONNECTORS ANALOG + PULSE Voltage Output Current Output 4.000 mA The EDGE Linearizer Table The EDGE System Settings K-Factor (pl/gal) i.oooooo Linearizer Table ON\OFF # Index Frequency K-Factor Digital Filter Sensitivity off Flow Units Gallons ANALOG + PULSE + MODBUS 8 PIN 1: 12-24VDC 2: GROUND 3: FREQ OUT 1 4: FREQ OUT 2 5: mA OUT 6: V OUT 7: MODBUS + 8: MODBUS - Flow Time Base Minutes Max...

THE EDGE FLOW SENSOR – WITH BLUETOOTH Ideal for use with all AW Gear Meter and Turbine flow meter applications requiring an analog, pulse, or Modbus output. PART NUMBER GUIDES THREAD-IN STYLE EDG1 – Temperature Rating A = Pulse B = Analog + 1 Pulse C = Analog + Pulse + Modbus Meter Type 12 = JVA (-10-30) Gear Meter 13 = JVA-60 Gear Meter 14 = JVA (-80/90) Gear Meter 22 = JVM/JVS (-10-30) Gear Meter 23 = JVM/JVS-60 Gear Meter 24 = JVM/JVS (-80/90) Gear Meter 31 = TRG Turbine Flow Meter 32 = TRG Turbine Flow Meter 35 = TW/TA3/TR Turbine Flow Meter 1 = One pickup input 2 = Two pickup input A =...