APPLICATION AREAS • Bolts • Screws • Press Fits • Pipe Threads • Pump Sleeves • No toxic heavy metals • Waterproof • Ultra-fine particles • Broad service temperature range • Corrosion resistant • For extreme pressure - up to 8928 kg/cm2 (126,983 psi) • Usable under most extreme conditions PACKAGING 250g Brush Top 500g Brush Top 20L DIRECTIONS Treat all threaded or press-fit parts before joining to make assembly and disassembly easier. Surfaces should be free of dirt, oil, grease, etc. Apply liberally to mating surfaces. Chesterton® 783 ACR represents the newest generation of anti-seize compound. A proprietary blend of ultra-fine inorganic solid lubricants, 783 ACR can be used under extremely severe conditions of temperature and pressure to assist in assembly and disassembly of threaded components. Because the particles are ultra-fine, they spread evenly and fill surface profiles to prevent metal to metal contact and insure thorough coverage. Chesterton 783 ACR protects assembled parts against corrosion and presents a barrier to the corrosive effects of moisture, steam, salt water, high temperatures and corrosive chemicals. In a standard corrosion test, ASTM B-117, 783 provides 20 times longer rust protection than conventional anti-seize products. In resistance to water wash off, 783 can be considered virtually waterproof. The result is long term performance even in difficult environments such as marine, chemical plants, or metals refining. TYPICAL PHYSICAL PROPERTIES Appearance NLGI Grade (ASTM D 217, DIN 51 518) Texture Specific Gravity Average Particle Size Extreme Pressure (ASTM D 2596, DIN 51 530) Dropping Point (ASTM D 566, ISO 2176) Operating Temperature Coeffecient of Friction "K" Factor (Skidmore-Wilhelm Method) Corrosion Resistance (ASTM B 117) 5% NaCl Copper Corrosion (ASTM D 130, DIN 51 811) 100°C (212°F) Water Washout (ASTM D 1265) 79C (175°F) Penetration (ASTM D 217, ISO 2137) Weld Point (ASTM 2596, DIN 51 350) Load Wear Index (ASTM 2596, DIN 51 350)

General Classification *Use of threaded pastes will not extend service temperature of fasteners/bolts. Consult bolting supplier for proper temperature and tension limits.